Modbus Organization

Advantages of Joining | Join Form | Toolkit | Subscribe to Newsletter

Text Size: smallmediumlarge

Modbus Device Directory

The Modbus Organization maintains a database of Modbus devices as a service to users looking for such devices for their applications. This list is always growing and changing. If you are a supplier and do not find your devices listed here, please visit our Contact Page to find out how to be listed.

Please note that the information below is provided by the respective suppliers, and that product listings do not constitute any endorsement or warranty on the part of the Modbus Organization.

  Filter by Device Type...
 AC/DC Drive Control Controller HMI Hardware
 I/O Interface I/O Module Sensor
 Misc. Hardware Modem Monitoring Hardware
 Network Gateway Network Host Adapter Remote Terminal Unit
 SCADA Hardware Software - Device Driver Software - HMI
 Software - OPC Software - Programming Software - SCADA
 Software - Testing and Simulation Software - Other
Wired Devices OnlyWireless Devices OnlyWired and Wireless Devices
Show Tested Devices OnlyShow Tested and Untested Devices

Company Device Description
Control Solutions, Inc. Minnesota

i.CanDoIt AddMe III
I/O Interface: i.CanDoIt AddMe III provides a Modbus-enabled standalone web server with scheduling, data logging, alarm monitoring with event notification, RTU to TCP gateway capability, and user programmability. The server is configured via a standard web browser and rule-based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server, and Modbus RTU master, are included.
Control Solutions, Inc. Minnesota

i.CanDoIt AddMe Jr.
I/O Interface: i.CanDoIt AddMe Jr. provides a Modbus-enabled standalone web server with scheduling, data logging, alarm monitoring with event notification, RTU to TCP gateway capability, and user programmability. The server is configured via a standard web browser and rule-based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server, and Modbus RTU master, are included.
Control Solutions, Inc. Minnesota

AddMe III Modbus I/O
I/O Interface: AddMe III provides 32 I/O points in a single Modbus RTU server device. Universal inputs are configurable as analog or discrete with integer or floating point data available. Data scaling with slope/intercept is supported, and several thermistor linearization tables are built in. This device is optimized for building automation and facility management with thermistor support for temperature input. Relay outputs include HOA switches and status indicators. AddMe Lite is programmable using a structured control language.
Control Solutions, Inc. Minnesota

AddMe Lite Modbus I/O
I/O Interface: AddMe Lite provides 14 I/O points in a single Modbus RTU server device. Universal inputs are configurable as analog or discrete with integer or floating point data available. Data scaling with slope/intercept is supported, and several thermistor linearization tables are built in. This device is optimized for building automation and facility management with thermistor support for temperature input. AddMe Lite is programmable using a structured control language.
Control Solutions, Inc. Minnesota

ValuPoint VP4-0610
I/O Interface: ValuPoint® Model VP4-0610 low cost programmable I/O for Modbus RTU provides server I/O, includes user programmable control, 2 analog/universal inputs, 2 discrete inputs, and 2 relay outputs. VP4-0610 can operate as Modbus client or server, with all I/O accessible as holding registers and/or coils. The VP4-0610 includes live debug support for the i.CanDrawIt® graphical programming tool.
Control Solutions, Inc. Minnesota

ValuPoint VP4-2310
I/O Interface: ValuPoint® Model VP4-2310 programmable I/O for Modbus RTU provides server I/O, includes user programmable control, 14 analog/universal inputs, 3 analog outputs, and 6 relay outputs. VP4-2310 can operate as Modbus client or server, with all I/O accessible as holding registers and/or coils. The VP4-2310 includes live debug support for the i.CanDrawIt® graphical programming tool.
Dataforth Corporation

isoLynx SLX200 Data Acquisition System
I/O Interface: SLX200 is a fast, intelligent, modular, fully isolated data acquisition system that provides superior reliability, accuracy, and isolation for a wide range of rugged high performance industrial applications. With its ability to interface with more than 650 SCM5B analog I/O modules, the isoLynx SLX200 offers maximum flexibility for factory automation, process control, test and measurement, machine control, and data acquisition applications.
HMS Networks

Anybus CompactCom M40 Ethernet Modbus-TCP, AB6603-B
I/O Module: The Anybus CompactCom M40 for Modbus TCP is a complete communication module which enables your products to communicate on a Modbus TCP network. By implementing the CompactCom concept into your product line, you will have instant access to any other industrial network by simply plugging in another Anybus module.
Schneider Electric SA

Advantys OTB Network Interface Module, OTB 1E0 DM9LP
I/O Interface: The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules. Each island has, on a DIN rail a network interface module (including Ethernet TCP/IP) with 12 24 V inputs, 6 relay outputs and 2 solid state outputs 24 V 0.3 A. As an extension, up to 7 discrete or analog I/O expansion modules can be added. This structure, created using IP 20 modules, can be used to manage 20 to 244 I/O per island over a maximum length of 328.7 mm (height 94.5 mm).
Schneider Electric SA

Advantys STB Network Interface Module
I/O Interface: Advantys STB Network Interface Module The STB NIP 2212 network interface module, located at the beginning of each island, are gateways for exchanging data between the TCP/IP network and the Advantys STB automation island. It also enable the configuration of parameters and addressing of installation devices. These settings are stored in the module's internal RAM or Flash memory. Optionally, they can be saved to the STB XMP 4440 removable memory card (32 Kb).
Schneider Electric SA

Premium family CPU module, P571634
Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications.
Schneider Electric SA

Premium family CPU module, P573634
Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications.
Schneider Electric SA

Premium family CPU module, P574634
Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications.
Schneider Electric SA

Premium family CPU module, P575634
Controller: Premium family CPU module used with the Unity software environment. The Premium family of Programmable Logic Controllers are optimized for complex machine applications.
Schneider Electric SA

Quantum family CPU module, CPU65160
Controller: Quantum family CPU module used with the Unity software environment. The Quantum family of Programmable Logic Controllers are optimized for process control and high availability needs.
Acromag

BusWorks 900EN and EtherStacks ES2000 Ethernet I/O ModulesI/O Module: A variety of analog and discrete input/output modules for monitoring sensors and controlling devices. Each remote I/O module provides a 10/100 Modbus TCP/IP interface and 4 to 96 channels.
Acromag

ES2161/ES2162, 32-Channel Differential Current or Voltage Analog InputI/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals. Units natively accept 32 differential high-level analog voltage or current inputs - ideal for most sensor interface applications in remote zones. For systems requiring high channel-to-channel isolation or a variety of input signals (voltage, current, temperature, frequency, load cell, etc.), the ES2162 has two ports that will each interface 16 inputs from an 8B signal conditioner backpanel.
Acromag

EtherStax Ethernet I/O blocks, ES2151, ES2152 I/O Module: Rugged, high-density Ethernet I/O blocks for distributed I/O and SCADA applications
Acromag

967EN & 968 EN I/O ModulesI/O Module: BusWorks Ethernet I/O series models 967EN and 968EN provide 8-channel interfaces for differential analog voltage or current input signals. Each model is available in industrial and commercial-grade versions.
Acromag

Ethernet Analog Output Modules, ES2171I/O Module: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals.
Acromag

958EN 16-channel single-ended voltage inputI/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation. The DB25 port provides a parallel connection to a rack of 8B analog input modules. The 8B modules provide an isolated front-end with signal conditioning of up to 16 sensor signals. Industrial-grade models add a configurable integrator/totalizer plus superior accuracy and temperature performance compared to the economical commercial-grade version.
eze System, Inc.

ezeio mkII controllerController: The ezeio is a complete solution for monitoring, alarming, control and automation of commercial and industrial equipment. The ezeio hardware connects to sensors, meters, thermostats, VFD's and other control devices locally via several industry standard interfaces. It communicates securely and seamlessly via a built-in global cellular modem, or optionally via Ethernet, to the eze.io cloud application where the user can access all data in real time as well as historical, set alarms, timers, schedules and custom logic. All configuration settings and programming is done via the cloud interface, allowing multiple concurrent users, automatic synchronization and secure access from anywhere without any special software or setup.
Acromag

901MB-0900 Discrete Input Module I/O Module: 12-Channel Discrete Input Module with Active Low Inputs
Acromag

902MB-0900 Discrete Output ModuleI/O Module: Twelve discrete input and/or output channels. Isolation separates the I/O, power, and network circuits.
Acromag

942MB Frequency/Pulse Counter ModuleI/O Module: 2 input channels - periodic/pulse waveform signals
Acromag

918MB Analog Output ModuleI/O Module: 4 analog output channels - DC voltage
Acromag

917MB Analog Output ModuleI/O Module: 4 analog output channels - DC current
Acromag

934MB Analog Input ModuleI/O Module: 4 temperature input channels - RTD
Acromag

932MB Analog Input ModuleI/O Module: 2 temperature input channels - RTD
Acromag

924MB Analog Input ModuleI/O Module: 4 temperature input channels - thermocouple/millivolt
Acromag

914MB Analog Input ModuleI/O Module: 4 analog input channels - DC voltage
Acromag

913MB Analog Input ModuleI/O Module: 4 analog input channels - DC current
Acromag

906MB Discrete I/O ModuleI/O Module: 12 discrete I/O channels (any mix) - active high inputs, sourcing outputs
Acromag

905MB Discrete Output ModuleI/O Module: 12 discrete output channels - sourcing or high-side switching
Acromag

904MB Discrete Input ModuleI/O Module: 12 discrete input channels - active high
Acromag

903MB-0900 Discrete I/O ModulesI/O Module: 12 Channel Discrete I/O (any mix) - Active Low Inputs, Sinking Outputs
Acromag

ES2113 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O blocks provide a ruggedized, high-density solution to interface a large quantity of discrete I/O signals to your control system. A stackable aluminum housing maintains a small footprint and stands up to harsh, industrial environments. Web-based configuration simplifies setup with any web browser.
Acromag

ES2153 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals. Units accept 16 single-ended analog voltage inputs and 16 single-ended current inputs. A DB25 port supports an alternate interface of voltage inputs from 8B signal conditioning modules. This combination of high-density analog current and voltage inputs is ideal for many sensor interface applications in remote zones.
Acromag

ES2163 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O modules provide a rugged, high-density, and high-speed solution to inter-face a large quantity of analog input signals to SCADA and distributed I/O systems. Each unit converts up to 64 single-ended analog current signals from various sensors and instruments for transmission to an Ethernet-based control network. Typical applications include process control, automated manufacturing, remote data acquisition, test and measurement, embedded computing, and supervisory monitoring systems
Acromag

ES2164 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O modules provide a rugged, high-density, and high-speed solution to interface a large quantity of analog input signals to SCADA and distributed I/O systems. Each unit converts up to 64 single-ended analog voltage signals from various sensors and instruments for transmission to an Ethernet-based control network. Typical applications include process control, automated manufacturing, remote data acquisition, test and measurement, embedded computing, and supervisory monitoring systems
Acromag

ES2171 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals. Each unit provides 16 high-level analog current outputs to control various industrial devices.
Acromag

ES2172 EtherStax Ethernet I/O BlockI/O Interface: EtherStax I/O units provide a rugged, high-density, and high-speed solution to interface analog output signals. Each unit provides 16 high-level analog voltage out-puts to control various industrial devices.
Acromag

BusWorks 951EN & 952ENI/O Module: These modules provide an isolated Ethernet network interface for analog and discrete I/O signals. Multi-range analog inputs and outputs support a wide variety of industrial devices. High-resolution, low noise, A/D and D/A converters deliver high accuracy and reliability. 3-way isolation improves system performance. Discrete I/O provides monitoring and control of on/off, high/low, or open/close industrial devices. Tandem I/O provides output level control and status verification in one unit.
Acromag

BusWorks 961EN & 962ENI/O Module: These modules provide an isolated Ethernet network interface for six analog input channels. Differential inputs eliminate ground loops and thus the need for isolators in many applications. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
Acromag

BusWorks 965ENI/O Module: These modules provide an isolated Ethernet network interface for up to six input channels. Differential inputs eliminate ground noise and each terminal block includes a cold junction compensation (CJC) sensor for more precise temperature measurements. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
Acromag

BusWorks 963EN & 964ENI/O Module: These modules provide an isolated Ethernet network interface for twelve analog input channels. Compact design saves space and lowers system costs. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability.
Acromag

BusWorks 966ENI/O Module: These modules provide an isolated Ethernet network interface for up to six input channels. Multi-range inputs accept signals from a variety of sensors and devices. High-resolution, low noise, A/D converters deliver high accuracy and reliability. 3-way isolation further improves the system performance.
Acromag

BusWorks 972EN & 973ENI/O Module: These modules provide up to six channels of analog output. Multi-range outputs support a wide variety of industrial devices. They can drive displays and recorders, control drives, or send analog signals to other systems. High-resolution, low noise, D/A converters deliver high accuracy and reliability. 3-way isolation further improves system performance.
Acromag

BusWorks 981EN & 982EN & 983ENI/O Module: These modules provide an isolated Ethernet network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983EN model with tandem I/O provides output level control and status verification in one unit.
Acromag

BusWorks 989ENI/O Module: These modules provide an isolated Ethernet interface for any input/output mix of up to 16 discrete signals. Inputs sense the status of dry contacts, switches, power supplies, and DC logic. Industrial-grade units have eight 32-bit counters with timers, alarms, and non-volatile memory for metering, totalizing, and low-frequency periodic measurement. The outputs control solid-state switching of lamps, horns, and other devices.
Acromag

BusWorks 993ENI/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation.
Acromag

BusWorks 994ENI/O Module: These modules interface high-level analog input signals to an Ethernet control network. A high-performance design ensures reliable measurements and dependable operation.
Acromag

BusWorks XT I/O ModulesI/O Module: Each module processes I/O signals on up to sixteen channels and features dual Ethernet ports, as well as pluggable front-facing terminals, for more convenient wiring. This allows daisy-chaining of modules for simpler installation and minimized switch requirements for reduced cost.
AutomationDirect.com

CLICK PLUS PLC, C2-01CPU-2Controller: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
AutomationDirect.com

CLICK PLUS PLC, C2-02CPU-2Controller: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
AutomationDirect.com

CLICK PLUS PLC, C2-03CPU-2Controller: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
AutomationDirect.com

CLICK PLUS Communication Module, C2-DCMController: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. The C2-DCM is a 2 port Serial communication module that supports Modbus RTU and ASCII protocols. Both ports support RS-232/RS-485. One or more modules can be used in the CLICK PLUS option module slots.
AutomationDirect.com

T1K-MODBUSController: Modbus RTU Base Controller for Terminator I/O base, for connection to Modbus RTU master.
AutomationDirect.com

CLICK PLUS PLC, C2-01CPUController: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
AutomationDirect.com

CLICK PLUS PLC, C2-02CPUController: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
AutomationDirect.com

CLICK PLUS PLC, C2-03CPUController: The CLICK PLUS series of controllers offers low-cost, brick/stackable CPU options with varying degrees of capability so you can choose the features that best fit your application. Built-in Wi-Fi and Bluetooth, serial ports, micro-SD for log data storage, Run-time edits, high-speed counter/timer inputs and PID Functions with Auto-tune are all available options with these low-cost CPUs.
Control Solutions, Inc. Minnesota

BAS-700 Series Hardware with i.CanDoItI/O Interface: Formerly marketed as "Modbus by the Module," this product line has evolved into i.CanDoIt® The BAS-700 i.CanDoIt consists of a BAS-7050 Ethernet processor module plus one to eight I/O modules from the BAS-700 series. All configuration is done through the embedded web server.
Control Solutions, Inc. Minnesota

i.CanDoIt i.BoardI/O Interface: The i.CanDoIt i.Board provides a low-cost, Modbus-enabled standalone web server with alarm monitoring with event notification, and user programmability using Script Basic. The server is configured via a standard web browser and rule based templates for alarms, event notifications, I/O point configuration and all other features. The embedded server can be fully customized by the user's HTML and JavaScript wrapper. Modbus TCP client and server are included.
Control Solutions, Inc. Minnesota

i.Report VP3-2290I/O Interface: Model VP3-2290 Global Remote Telemetry Unit is ideal for demanding remote alarm monitoring and data logging. It includes cellular GPRS 3G or CDMA radio built in. The VP3-2290 includes 12 hardwire sensor inputs which are universally configurable as analog, temperature (thermistor), or discrete/dry contact inputs. Two inputs have 30V range for battery monitoring. High-speed pulse counting is provided on 2 inputs. The VP3-2290 also includes 8 discrete inputs and 2 discrete outputs. The VP3-2290 includes a Modbus RTU port that can operate in client or server mode. The VP3-2290 also includes a CAN/J1939 port for applications such as engine monitoring.
Control Solutions, Inc. Minnesota

ValuPoint VP4-2810I/O Interface: ValuPoint® Model VP4-2810 programmable I/O for Modbus RTU provides server I/O, includes user programmable control, 12 discrete inputs, and 16 discrete outputs. VP4-2810 can operate as Modbus client or server, with all I/O accessible as holding registers and/or coils. The VP4-2810 includes live debug support for the i.CanDrawIt® graphical programming tool.
Dataforth Corporation

isoLynx® SLX300 Data Acquisition SystemI/O Interface: Data acquisition system
Dataforth Corporation

MAQ®20 Industrial Data Acquisition & Control SystemController: The MAQ®20 family consists of high-performance, DIN rail mounted, programmable, multi-channel, industrially rugged signal conditioning I/O and communications modules. The MAQ20 interfaces directly to industrial sensors and transducers. It provides input protection, noise filtering, amplification, CJC and linearization, shunt calibration, and data logging.
Domat Control System s.r.o.

UC200 Room thermostat/temperature controllerController: UC200 is a communicative room heating and cooling controller with two binary inputs, two PWM outputs and a room sensor for control of a radiator or electrical heater and chilled ceiling. It is part of the UC... family with various I/O configurations. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC
Domat Control System s.r.o.

UC150 Room thermostat/temperature controllerController: UC150 is a communicative room heating controller with one PWM output and a room sensor for control of a radiator or electrical heater. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC.
Domat Control System s.r.o.

UI901BL Communicative room unit with CO2 sensorController: The room unit with CO2 sensor contains temperature sensor, NDIR CO2 sensor for carbon dioxide concentration measurement, humidity sensor, and control knob for setpoint control and other settings. Binary outputs are controlled over Modbus.
Domat Control System s.r.o.

ECIO2 I/O Module with Modbus RTU/TCP RouterI/O Module: The ECIO2 multiple I/O compact module contains I/O mix optimized for HVAC and home control applications. The module uses Ethernet (Modbus TCP) for communication with PLC, and RS485 (Modbus RTU) bus as link to optional extension RS485 I/O modules, and can be easily integrated in a variety of supervision and control systems.
Domat Control System s.r.o.

FCR011 Communicative fancoil controller Controller: FCR011 is a 230 VAC powered communicative fan coil controller (up to 3 fan stages, 24 V PWM heating and cooling valves). It may either work autonomously, or be connected to a primary controller or SCADA. As a room unit, UC010 is used.
Domat Control System s.r.o.

MarkMX.2 - DDC controllerController: The PAC (Programmable Automation Controller) markMX.2 is a freely programmable process station with i.MX6 UL processor and Linux operating system. It is suitable for control of large installations (approximately 400 - 500 physical data points). MarkMX contains one Ethernet port, 2x RS485 interface, and 2x RS232 interface for expanding I/O modules. On the board there is an I/O mix of 16 AI, 32 DI, 8 AO, and 32 DO.
Domat Control System s.r.o.

UI319 - Communicative room unit with CO2 sensor and PIR sensorController: UI319 is communicative room unit with analogue input for external Pt1000 sensor, with integrated temperature and humidity sensor, CO2 and PIR sensor, and control knob for setpoint control and other settings. The binary output is controlled either on a remote basis, or as thermostat, hygrostat or CO2 controller. The units communicate over Modbus RTU / RS485 and they can be used as open system components with majority of building control system and controllers.
eze System, Inc.

ezeio controllerController: The ezeio controller connects to analog sensors, switches and Modbus RTU devices locally, and communicates via the Internet to the ezecontrol.com cloud service. Designed from the ground up for Internet connectivity, the system is secure and reliable as well as easy to set up. The ezeio supports logging, alarming, automation and control functions with an easy-to-use configuration system. More advanced logic can be added with built-in script support. The web/cloud based interface allows multiple simultaneous users and account level access to any number of field units.
Hilscher GmbH

netIC 50-REI/O Interface: The netIC is a complete "Single Chip Module" in the compact dimensions of a Dual-In-Line (DIL) 32 pin plug-in module. It is based on the network controller netX and contains all components of a fieldbus or real-time Ethernet interface with an integrated 2-port switch and hub. With the netX technology the whole spectrum of relevant fieldbus and real-time Ethernet systems is covered. By exchanging the firmware, one single netIC can be used for multiple communication systems. User data is transferred with simple read-write commands to the application via the above mentioned serial interfaces. The well-known Modbus RTU protocol is used as a serial protocol. Conventional shifting registers can be controlled via a synchronous serial interface requiring no additional processor for a simple I/O-device.
KEB America

C6 HMI LC (All-in-One)Controller: The C6 HMI LC is an all-in-one HMI and PLC. The PLC programs in IEC 61131-3 programming languages. The units are offered in scaled sizes up to 15.6"W.
KEB America

C6 S14Controller: The C6 S14 is an all-in-one HMI and PLC. The PLC is suitable for demanding motion control tasks requiring coordinated control.
KEB America

C6 SmartController: The C6 SMART is an embedded PC that is capable or coordinated real-time motion control. It features an integrated micro-UPS and sure IoT remote connection capabilities.
Mac Valves, Inc.

MI/O-67®I/O Interface: The MI/O-67® communications module is the brains of the MI/O-67 platform and is the minimum required module to implement a fieldbus solution. Each communication module is capable of driving up to 32 solenoids (32 singles, 16 doubles max or any combination of the two up to 32 solenoids) on the MAConnect® stack. The module is capable of outputting 8A max (0.5 A max per channel) to the MAConnect stack. You can connect up to 12 additional modules to each communication module and have 8A shared across those additional modules. All of the MI/O-67 modules operate on a 24VDC negative common setup, attached to the MAConnect stack via a valve series specific adapter.
Moxa Inc.

ioLogik E1200 SeriesI/O Module: Ethernet remote I/O with two-port Ethernet Switches
Moxa Inc.

ioLogik E2200 seriesController: PC-based data acquisition solution with easy-to-use Click&Go control logic
Moxa Inc.

ioLogik E4200I/O Interface: Modular remote I/O solution for data acquisition and control
Opto22

Analog and Digital SNAP Brain, SNAP-B3000-MODBUSI/O Interface: With the SNAP-B3000-Modbus brain, you can use Opto 22 industrial I/O hardware with your existing Modbus-compatible controller. The SNAP-B3000-Modbus is a high-performance brain designed to remotely control a mix of both analog and digital I/O modules using the SNAP B-series I/O mounting racks. With SNAP B Series racks and any combination of compatible analog and digital SNAP I/O® modules, this brain provides a powerful and sophisticated I/O handling system. The on-board intelligence of the SNAP-B3000-Modbus offers many distributed control functions.
Opto22

SNAP PAC S-Series ControllersController: The SNAP PAC S-series programmable automation controllers provide powerful, real-time control and communication to meet your industrial control, monitoring, and data acquisition needs. These compact, industrially hardened controllers can handle multiple control, automation, and data acquisition tasks involving digital and analog control, serial string handling, PID, and enterprise connectivity.
Opto22

SNAP PAC R-Series ControllersController: The SNAP PAC R-series programmable automation controllers provide real-time control and communication, monitoring, and data acquisition. Part of the Opto 22 SNAP PAC System™, the R-series PAC is a rack-mounted, industrially hardened unit that can handle multiple tasks involving digital and analog control, serial string handling, communication, and enterprise connectivity. SNAP PAC R-series controllers can monitor and control a wide range of devices and equipment wired to the I/O on its own rack and to I/O on distributed racks equipped with SNAP PAC EB-series brains. Alternatively, the R-series controller can be used as a server to a larger, SNAP PAC S-series standalone industrial controller or a SoftPAC™ software-based controller for PC-based control. Six models of the SNAP PAC R-series controller are available
Opto22

SNAP PAC Brains, EB1 & EB2I/O Interface: SNAP PAC brains are powerful and versatile I/O and network communications processors for the SNAP PAC System™ They are designed primarily to work in distributed systems controlled by a SNAP PAC programmable automation controller, but SNAP PAC Ethernet brains can also be used as intelligent remote I/O in an Allen-Bradley® RSLogix®-based PLC system or as PC-based I/O.
Opto22

E1 and E2 Brain BoardsI/O Interface: E1 and E2 brain boards are Ethernet-ready I/O and communication processors for digital and analog I/O systems. The E1 connects to a rack of Opto 22 G1, G4, or Quad Pak™ digital I/O modules, while the E2 connects to a rack of Opto 22 G1 analog I/O modules. Each brain board communicates with a host computer and performs control functions for each I/O point.
Opto22

SoftPAC Software-based ControllerController: SoftPAC™ is a software-based programmable automation controller (PAC) designed for PC-based control. SoftPAC gives you the choice of running your control program in a Microsoft Windows environment rather than on a standalone or rack-mounted PAC. SoftPAC is designed for machine builders or OEMs who may already have a PC in their product or want to use one for a new design.
Opto22

groov RIO®I/O Interface: Opto 22's groov RIO - remote Ethernet I/O for industrial internet of things (IIoT) and automation applications - solves two main problems with most remote I/O today: 1. specifying all the required components (rack, power supply, bus coupler, module types, and more) is time-consuming, difficult, and requires significant domain expertise; and 2. communicating data among field devices, control systems, company software, and cloud services is complex and costly, requiring PLCs, programming, and middleware.
Opto22

groov® EPIC PROCESSORController: The Edge Programmable Industrial Controller is an embedded Linux®, real-time controller with gateway functions. The modern design of the groov EPIC processor offers a compact, industrial computer that features a resistive-touch, high-resolution LCD display. The LCD display lifts to provide easy access to the power button, power supply connectors, network interfaces, ports, and status LEDs.
Phoenix Contact

nanoLine (nLC50 )Controller: nanoLine is a small programmable controller/relay with Ethernet connectivity (MODBUS TCP server or MODBUS RTU server), a removable operator display and easy flow chart programming. nanoLine is designed to control small to midsize machines that require few I/O points. Base controller stations are available in 24 V DC, 24 V AC/DC and 115 V AC versions. The on-board I/O consists of digital inputs and outputs. The nanoLine accommodates up to three I/O expansion modules, bringing the total possible I/O count to 24 digital inputs and 16 digital outputs.
ProSoft Technology Inc

Modbus Client/Server Module for FLEX - MVI94-MCMI/O Interface: The MVI94 Modbus Client/Server Communication Module allows Rockwell Automation FLEX processors to interface easily with other Modbus protocol compatible devices. Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. A 5000-word register space in the module exchanges data between the processor and the Modbus network.
ProSoft Technology Inc

Modbus Server Adapter for FLEX or Integra I/O modules, 3170-MBSI/O Interface: The 3170-MBS Modbus Server Communication Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Client.
ProSoft Technology Inc

Modbus Serial Module for CompactLogix L1 and Point I/O Adapters, ILX34-MBS232I/O Interface: The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems. Can be configured as a Client or Server.
ProSoft Technology Inc

Modbus TCP Client/Server Enhanced Network Interface Module for ControlLogix, MVI56E-MNET/MNETXTI/O Interface: MVI56E enhancements include local and remote configuration and diagnostics through the module's Ethernet port, CIPconnect technology for bridging though Rockwell Automation ControlNet and EtherNetIP networks, and an on-board web server for access to module documentation and sample program files. The MVI56E-MNET and MVI56E-MNETXT are functionally the same. The MVI56E-MNET is designed for standard process applications. The MVI56E-MNETXT is designed for the Logix-XT control platform, allowing it to operate in extreme environments, at higher operating temps, and has a conformal coating to protect it from harsh or caustic conditions.
ProSoft Technology Inc

Ethernet to Belden 9463 Blue Hose Industrial Media Converters, IMC-BHx-ACI/O Interface: ProSoft's IMC-BHx-AC Industrial Media Converters allow users to simultaneously run EtherNet/IP and A-B Remote I/O data on existing Belden 9463 Blue Hose media. Once Industrial Media Converters have been added to the system, users can deploy a phased upgrade of their legacy control system. A Logix system can be deployed on top of the existing Remote I/O infrastructure allowing users to upgrade their legacy I/O, drives, HMIs and other end devices. Upgrading your control system can be done during scheduled downtime, saving time and money.
ProSoft Technology Inc

Modbus Client/Server Network Interface Module for CompactLogix, MVI69-MCMI/O Interface: The MVI69 Modbus Client/Server Network Interface Module allows Rockwell CompactLogix processors to interface with Modbus-compatible devices. These include not only Modicon PLCs but also a wide assortment of third-party devices found in nearly every industry.
ProSoft Technology Inc

Modbus Client/Server Module for SLC Platform, MVI46-MCMI/O Interface: The MVI46 Modbus Client/Server Communication Module allows Rockwell Automation SLC processors to interface easily with other Modbus protocol compatible devices. Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. The module acts as an input/output module between the Modbus network and the Rockwell Automation backplane. The data transfer from the processor is asynchronous from the actions on the Modbus network.
ProSoft Technology Inc

Modbus TCP/IP Ethernet Module for SLC Platform, MVI46-MNETI/O Interface: The MVI46 Modbus TCP/IP Communication Module is designed to allow SLC processors to interface easily with other Modbus TCP/IP protocol-compatible devices using client and server functionality. Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other clients and server devices.
ProSoft Technology Inc

Message Manager for Industrial Communication, ILX56-MMI/O Interface: Easy-to-use data transfer engine for the ControlLogix 1756 platform, supporting Rockwell PLCs and PAC network protocols, as well as platforms and devices that use Siemens Industrial Ethernet and Modbus TCP protocols.
ProSoft Technology Inc

Modbus TCP/IP for SLC platform Client Only MVI46-MNETCI/O Interface: The MVI46 Modbus TCP/IP Client Communication Module is designed to allow SLC processors to interface easily with other Modbus TCP protocol-compatible devices.
ProSoft Technology Inc

Modbus TCP/IP for CompactLogix MVI69-MNETI/O Interface: The inRAx Modbus TCP/IP Communication Module is designed to allow CompactLogix processors to interface easily with other Modbus TCP protocol-compatible devices.
ProSoft Technology Inc

Modbus TCP/IP for CompactLogix Client Only MVI69-MNETCI/O Interface: The MVI69 Modbus TCP/IP Client Communication Module is designed to allow CompactLogix I/O compatible processors to interface easily with other Modbus TCP protocol-compatible devices.
ProSoft Technology Inc

Modbus Client/Serve for FLEX MVI94-MCM-MHII/O Interface: The MVI94 Modbus Client/Serve Communication Module allows Rockwell Automation FLEX processors to interface easily with other Modbus protocol compatible devices.
ProSoft Technology Inc

Modbus Serial Module for CompactLogix L1 and Point I/O Adapters, ILX34-MBS485I/O Interface: The module can be used in CompactLogix L1 processors or Distributed 1734 Point I/O systems; Configured as a Client or Server.
ProSoft Technology Inc

Modbus TCP Lite Communication Module for CompactLogix, MVI69L-MBTCPI/O Interface: With an Add-on Profile and an Add-on Instruction to reduce commissioning time, the MVI69L-MBTCP has a single Ethernet port for diagnostic and application data. Supports both Client and Server connectivity to interface with a variety of devices using Modbus TCP
ProSoft Technology Inc

Modbus TCP Multi Client Enhanced Network Interface Module with Reduced Data Block for ControlLogix, MVI56E-MNETCRI/O Interface: Improves performance when controlling multiple servers on a Modbus TCP network, by supporting up to 30 clients. MVI56E enhancements include configuration and management through the module Ethernet port, CIPconnect technology for bridging through ControlNet and EtherNet/IP networks, and has a web server to access on-board documentation, Add-On Instructions, and sample program files. Uses a small I/O data image for transfer of data between the module and the ControlLogix processor, making it ideal for ControlNet or Ethernet applications with the module in a remote rack.
ProSoft Technology Inc

Modbus TCP Multi Client/Server Enhanced Network Interface Module for ControlLogix, MVI56E-MNETCI/O Interface: Improves performance when controlling multiple servers on a Modbus TCP network, by supporting up to 30 Clients. Also supports up to 20 server connections (10MNET, 10 MBAP). MVI56E enhancements include configuration and management through the module's Ethernet port, and CIPconnect technology for bridging though ControlNet and EtherNet/IP networks.
ProSoft Technology Inc

Modbus Client/Serve Enhanced Network Interface Module for ControlLogix, MVI56E-MCM/MCMXTI/O Interface: The MVI56E-MCM and MVI56E-MCMXT act as input/output modules on the ControlLogix backplane, making Modbus data appear as I/O data to the processor. Two independently configurable serial ports can operate on the same or different Modbus networks. The MVI56E-MCM is designed for standard process applications and the MVI56E-MCMXT is designed for the Logix-XT control platform, allowing it to operate in extreme environments. Can tolerate higher operating temps, and has conformal coating for protection in harsh or caustic conditions.
ProSoft Technology Inc

Modbus TCP Client/Server Enhanced Network Interface Module with Reduced Data Block for ControlLogix, MVI56E-MNETRI/O Interface: The MVI56E-MNETR uses a reduced I/O data image block size for transferring data between itself and a ControlLogix processor. This makes it ideal for remote rack applications using ControlNet or EtherNet/IP process networks. The module also works well for applications that require redundant ControlLogix processors.
ProSoft Technology Inc

Modbus RTU/ASCII Client/Serve Communication Module, PTQ-MCMI/O Interface: Provides a way for users of the Schneider Electric Quantum processor to add two Modbus serial ports to the control platform. The module acts as an Options module for the Quantum platform allowing communication on a Modbus serial network. Compatible devices include Modicon® PLCs (almost all support the Modbus protocol) and a wide range of process and control devices from a variety of manufacturers.
ProSoft Technology Inc

Modbus Client/Serve Enhanced Network Interface Module with Reduced Data Block for ControlLogix, MVI56E-MCMRI/O Interface: The Reduced Data Block implementation requires less backplane/network bandwidth; the smaller data blocks are easier to schedule and transfer on ControlNet networks. An ideal solution for remote chassis installations. The MVI56E-MCM and the MVI56E-MCMXT act as I/O modules on the ControlLogix backplane. Two independently-configurable serial ports can operate on the same or different Modbus networks. Each port can be configured as a Modbus client or server, sharing the same user-controlled 5000-word database.
ProSoft Technology Inc

Modbus Serial Enhanced Communication Module, MVI69E-MBSI/O Interface: This module comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69E-MBS has two serial ports and supports both Client and Server connectivity to interface with a variety of devices using the Modbus Protocol.
ProSoft Technology Inc

Modbus TCP Enhanced Communication Module, MVI69E-MBTCPI/O Interface: The MVI69E-MBTCP comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. It has a single Ethernet port for diagnostic and application data. The module supports both Client and Server connectivity to interface with a variety of devices using the Modbus Protocol.
ProSoft Technology Inc

Modbus Serial Lite Communication Module for CompactLogix, MVI69L-MBSI/O Interface: MVI69L-MBS has an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69L-MBS has a single serial port and can support either Client or Server connectivity to interface with a variety of devices using the Modbus Protocol.
SAUTER

modu524/525+721Controller: The modu524/525 automation stations (AS) are used to regulate, control, monitor and optimise operational installations. They are based entirely on BACnet/IP communication. A web server (modu-Web) is integrated into the AS for comprehensive operation, direct visualisation of the data points, notification and forwarding of alarms and creation of time profiles (scheduler). The moduCom communication module modu721 is used to extend the modu524 and modu525 automation stations. It is used to integrate third-party products on the automation level in operational systems such as HVAC engineering. Third-party products based on the field bus protocols for EIA-232 or EIA-485 such as Modbus/RTU, M-Bus can be integrated in the automation station. This allows for the option of BACnet/IP communication with the management level.
SAUTER

ecos504/505Controller: The ecos 5 system family comprises a range of devices for room automation for the BACnet/IP system bus. The ecos504/505 room automation station (AS) is a modular, freely programmable BACnet Building Controller (B-BC) for the automation of up to eight rooms or flexible room segments with the functions room climate, lighting and sunshading. The ecos504/505 as BACnet Building Controller (B-BC) can also be used as an individual AS for other functions in building automation (ventilation system unit, decentral data preparation for devices on a BACnet MS/TP line, central control of multiple VAV boxes etc.). The powerful programming environment, SAUTER CASE Suite, and the available function libraries allow both standard tasks of room automation and complex projects with flexible room division, based on room segments, to be carried out efficiently. Room operating units of the ecoUnit series, remote ecoLink I/O modules and two EnOcean ecoMod580 wireless interfaces are connected to the ecos504/505 via RS-485 interfaces. A half-duplex, 2-wire, electrically isolated RS-485 interface (variant F0C1) with the Modbus protocol as client (Modbus/RTU and Modbus/ASCII) enables the integration of up to 247 Modbus devices (Modbus servers) such as multi-sensors, room operating units, energy meters (electricity, heat), intelligent actuators, communicative controllers etc.
Schneider Electric SA

Tesys U Motor Control and Protection UnitsController: The TeSys model U starter controller is a D.O.L. starter which performs the following functions protection and control of single-phase or 3-phase motors: breaking function, overload and short-circuit protection, thermal overload protection, power switching; control of the application: protection function alarms, application monitoring (running time, number of faults, motor current values, etc.), logs (last 5 faults saved, together with motor parameter values). These functions can be added by selecting control units and function modules which simply clip into the power base The product can therefore be customized at the last moment.
Schneider Electric SA

Easergy Substation Control UnitController: Fault Passage Indicator ( phase and earth fault for each feeder); Communication system (compliance with most popular protocol such as TCP/IP, IEC 870-5-101, DNP3, Modbus; compliance with various transmission system such as Radio, GSM, PSTN, optical fiber); Interface with switchgears motorization (ready to connect to standard switchgears); Uninterrupted power supply (battery backup power supply, supply for motor mechanism and remote transmission devices); Current measurement; Automation (autochange over, sectionnalizer); Local control.
Schneider Electric SA

Varlogic Power Factor ControllerController: The Varlogic power factor controller permanently measures the reactive power of the installation and control connection and disconnection of capacitor steps in order to obtain the required power factor. It is available in R6, R12 and RC12 type according to number of step output contacts.
Schneider Electric SA

Momentum Network Interface ModuleI/O Interface: Momentum I/O products are modular. Communication Adapters and Processor Adapters are designed to work as functional modules when they are snapped onto a Momentum I/O base. The I/O bases fit into compact standard housings that can be mounted on a DIN rail or on panels in a cabinet. They read information from field sensing devices and control discrete and analog field actuating devices. Terminal blocks and bus bars are available for use with the bases so that they can be used to support 2-, 3-, and 4-wire field devices.
Schneider Electric SA

Advantys OTB Network Interface Module, OTB 1S0 DM9LPI/O Interface: The Advantys OTB distributed I/O solution consists of a compact system (network interface and integrated I/O) with the addition of Twido I/O expansion modules. Each island has, on a DIN rail a network intface module (including Ethernet TCP/IP) with 12 24 V inputs, 6 relay outputs and 2 solid state outputs 24 V 0.3 A. As an extension, up to 7 discrete or analog I/O expansion modules can be added. This structure, created using IP 20 modules, can be used to manage 20 to 244 I/O per island over a maximum length of 328.7 mm (height 94.5 mm).
Schneider Electric SA

Motor Control and Protection UnitsController: The LT6 multifunction relay incorporates multiple functions that can be configured locally or remotely, and communication via a bus and its I/O, making it an intelligent protector, ideal for the highly demanding motor protection environment.
Schneider Electric SA

Altistart Soft StartersController: The Altistart 48 soft start/soft stop unit is a controller with 6 thyristors that is used for the torque-controlled soft starting and stopping of three-phase squirrel cage asynchronous motors in the power range between 4 and 1200 kW. It offers soft starting and deceleration functions along with machine and motor protection functions as well as functions for communicating with control systems. These functions are designed for use in state-of-the-art applications in centrifugal machines, pumps, fans, compressors and conveyors, which are primarily to be found in the construction, food & beverage, and chemical industries. The high-performance algorithms of the Altistart 48 contribute significantly to its robustness, safety and ease of setup.
Schneider Electric SA

Twido Programmable ControllersController: The Twido range of programmable controllers offers an "all-in-one" solution in a compact overall size (80/95 x 90 x 70 mm). A variety of expansion options and product options offer the user a degree of flexibility that is generally only available with larger automation platforms. The TWD LCAA 24DRF 24 I/O compact base controller can take up to 4 discrete I/O expansion modules (corresponding to a 64 I/O configuration), optional modules such as a digital display, memory cartridge and real-time clock cartridge, as well as an additional RS 485 or RS 232C communication port.
Schneider Electric SA

M1E PLC ProcessorController: The Momentum M1 processor adapters are based on the Modicon 984 family of products. You can mount these Adapters on Momentum I/O Bases to provide intelligence to the I/O. The Processor Adapter can quickly and independently solve logic, control its own local I/O (discrete or analog), and communicate to other control entities through one of a number of Momentum communication options (Base one link Modbus RS 232 and one network TCP/IP 10Base-T on RJ 45). The Processor Adapter can turn an ordinary I/O Base into a PID controller or high-speed logic solver.
Schneider Electric SA

M1 PLC ProcessorController: The Momentum M1 processor adapters are based on the Modicon 984 family of products. You can mount these Adapters on Momentum I/O Bases to provide intelligence to the I/O. The Processor Adapter can quickly and independently solve logic, control its own local I/O (discrete or analog), and communicate to other control entities through one of a number of Momentum communication options (Base on link Modbus on RS 232 and one link Modbus on RS 485). The Processor Adapter can turn an ordinary I/O Base into a PID controller or high-speed logic solver.
Schneider Electric SA

Micro PL7 Processors, TSX 37Controller: TSX 37 XX is a compact or modular PLC for OEM machine builders, with up to 484 I/O. Applications: - Machine & manufacturing control - Infrastructures
Schneider Electric SA

Quantum Concept Processors, 140 CPU 5(6)34 1.AController: Quantum CPUs, which are compatible with Concept and ProWORX software, are single-slot programmable controllers with built-in executive memory, application memory and communication ports. With all memory components on-board, you do not need extra chips or cartridges for configuration. The processors offered can be differentiated by their memory capacities, processing speeds and communication options.
Schneider Electric SA

Quantum Concept Processors, 140 CPU 113 ...Controller: Quantum CPUs, which are compatible with Concept and ProWORX software, are single-slot programmable controllers with built-in executive memory, application memory and communication ports. With all memory components on-board, you do not need extra chips or cartridges for configuration. The processors offered can be differentiated by their memory capacities, processing speeds and communication options.
Schneider Electric SA

Quantum Unity Processors, 140 CPU 6.1 .0Controller: Modicon Quantum CPUs 6 are a family of high-performance programmable controllers based on 486, 586, and Pentium processors. They are compatible with Unity Pro software. Some of the features implemented in these CPUs include: - Superior scan times and I/O throughput. - Ability to handle interrupts, timed and I/O based. - Handling of Fast task, as well as a Master task. - Memory expansion through PCMCIA cards. - Multiple communication interfaces embedded in the CPU. - Ethernet 10Base-T/100Base-TX and 100Base-FX - A user-friendly diagnostic and operation LCD display on the front panel of high-end models. The processors offered can be differentiated by their memory capacities, processing speeds and communication options.
Schneider Electric SA

Quantum Unity Processors, 140 CPU 3(4,5).. 1Controller: Modicon Quantum CPUs 3.., 4.., 5.. are a family of high-performance programmable controllers based on 486, 586 and Pentium processors, and are compatible with Unity Pro software. Some of the features implemented in these CPUs include: - Superior scan times and I/O throughput. - Ability to handle interrupts, timed and I/O based. - Handling of Fast task, as well as a Master task. - Memory expansion through PCMCIA cards. - Multiple communication interfaces embedded in the CPU. - A user-friendly diagnostic and operation LCD display on the front panel of high-end models. The processors offered can be differentiated by their memory capacities, processing speeds and communication options.
Schneider Electric SA

Preventa safety controllersController: Safety controllers XPS MC XXX are designed to meet the requirements of safety applications requiring conformity to category 4 of standard EN 954-1. They are available in 2 versions: - XPS MC16X with 16 inputs and 8 independent safety outputs, - XPS MC32X with 32 inputs and 8 independent safety outputs. Safety controllers devices are based on redundant microprocessor technology, and therefore benefit from more sophisticated functionality: flexibility of choice of safety function and more accurate diagnostics represent some of the advantages from which machine manufacturers and users can benefit by integrating these innovative solutions.
Schneider Electric SA

Atrium Unity Processors, TSX PCI 57 ..4M and TLX CD GTW 10MController: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication). The TCP/IP software gateway enables via the integrated Ethernet or modem port in the PC.
Schneider Electric SA

Atrium Unity Processors, TSX PCI 57 ..4M and TLX CD GTW 10MController: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication). The TCP/IP software gateway enables via the integrated Ethernet or modem port in the PC.
Schneider Electric SA

Atrium Unity Processors, TSX PCI 57 ..4MController: Atrium TSX PCI 57 ..4M slot PLCs are PC format cards (PCI 32-bit/25?33 MHz bus) to be integrated into a PC running under Windows 2000 or Windows XP. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLC manages the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific and communication.
Schneider Electric SA

Premium Unity Processors, TSX P57 ..4MController: Premium TSX P57 ..4M automation platform processors manage the entire PLC station comprising: - Discrete I/O modules - Preventa safety modules - Analog I/O modules - Application-specific modules (counter, motion, weighing, communication) If the PLC station needs to extend across a certain distance, these modules can be distributed: - Either in several racks interconnected by Bus X (max. 700 m) - Or via one of the supported fieldbuses. The processors are differentiated by their memory capacities, processing speeds, number of I/O, and number of communication ports.According to the model, Premium processors include: - A 1 Mbps Fipio bus link (bus manager)
Schneider Electric SA

Atrium PL7 ProcessorsController: Atrium T PCX 57 ..3M slot PLCs are PC format cards (16-bit ISA bus) to be integrated into a PC running under OS Microsoft Windows. This combination of PLC and PC optimizes performance in applications requiring, for example, a higher level of communication, control or supervision functions. The slot PLCs manage the entire PLC station, which comprises the same I/O modules as Premium processors (discrete, analog, application-specific, and communication). These modules can be distributed in one or more racks connected on the bus X.
Schneider Electric SA

Premium PL7, TSX 57 .. 3MController: Premium TSX P57 ..3M control system platform processors manage the entire PLC station comprising discrete or I/O modules, Preventa safety modules, analog I/O modules, and application-specific modules, which can be distributed over one or more racks connected on Bus X or on a fieldbus. Depending on the model, Premium processors include: - A 1 Mbps Fipio bus link (bus manager).
Schneider Electric SA

Premium PL7, TSX 57 .. 23MController: Premium TSX P57 ..3M control system platform processors manage the entire PLC station comprising discrete or I/O modules, Preventa safety modules, analog I/O modules, and application-specific modules, which can be distributed over one or more racks connected on Bus X or on a fieldbus. Depending on the model, Premium processors include: - A 10 or 100 Mbps TCP/IP Ethernet port (RJ45 connection) - A 1 Mbps Fipio bus link (bus manager)
Schneider Electric SA

Twido Programmable ControllersController: The Twido range of programmable controllers offers an "all-in-one" solution in a compact overall size (80/95 x 90 x 70 mm). A variety of expansion options and product options offer the user a degree of flexibility that is generally only available with larger automation platforms. The TWD LCAA 24DRF 24 I/O compact base controller can take up to 4 discrete I/O expansion modules (corresponding to a 64 I/O configuration), optional modules such as a digital display, memory cartridge and real-time clock cartridge, as well as an additional RS 485 or RS 232C communication port.
Schneider Electric SA

Advantys ETBI/O Interface: Advantys ETB is a family of IP 67 digital I/O modules with direct connection to the Ethernet (Modbus TCP/IP) Communication Network.
WAGO Kontakttechnik GmbH & Co. KG

750-352 ECO Ethernet Fieldbus CouplerI/O Interface: I/O-SYSTEM 750 is a complete field-side wiring system for bus terminals without definition of the final fieldbus. Combination of digital and analog I/Os with different potentials and signals within one fieldbus node. The ECO Coupler supports prominent protocols such as MODBUS TCP/IP and EtherNet I/P and accommodates 64 I/O modules.
WAGO Kontakttechnik GmbH & Co. KG

Programmable Fieldbus Controller, 750-881Controller: High-speed 750-881 ETHERNET 2.0 Programmable Fieldbus Controller processes 1000 instructions/235 microsecs, and provides significant amounts of memory for PLC programs and Web applications.
B&R Industrial AutomationX20 bus controller for Modbus TCP
Controller: The X20BC0087 bus controller enables X2X Link I/O nodes to be linked to Modbus TCP. The bus controller is operated with the Modbus TCP library or by external systems with a Modbus TCP master function. Fieldbus: Modbus/TCP; I/O configuration via the fieldbus; Integrated 2x switch for efficient cabling; Configurable I/O cycle (0.5 - 4 ms); Reaction time: 1 - 8 ms (depending on load on integrated switch)
Balogh T.A.G. CorporationBIET-Ethernet IP Control Interface
Controller: The BIET module is a single board EtherNet solution for Automatic Identification. The BIET module integrates BALOGH's Passive Radio Frequency Identification Technology and the EtherNet architecture into one field mountable enclosure. The BIET module is designed to manage two BALOGH Transceiver channels and allows the user to pass TAG data across an EtherNet network with a simple set of instructions. This is a multi-protocol board, it communicates with TCP/IP, EtherNet/IP, and ModbusTCP/IP protocols.
Doosan Heavy Industries & ConstructionGUARDIAN SIF-ES14
Controller: SIF-ES14 supports industrial communication protocol which is Modbus TCP/Serial (Server Mode), and uses the VME BUS Platform. It has several interfaces which are an Ethernet, RS-485 and RS-422. The Ethernet interface has four ports and each ports can be set 10/100/1000 Mbps. The Serial interface has eight RS-485 Half-Duplex ports and two RS-422 Multi-Drop ports. However, only one channel can be used to select Ethernet and Serial. The applications are stored into the NAND Flash Memory using VxWorks TFFS, and are loaded into DRAM to run Modbus TCP/Serial program.
Holscher + Leuschner GmbHL167
I/O Module: The L167 provides 16 discrete optically isolated inputs and 24 discrete optically isolated open emitter outputs. They are grouped in eight-bit segments, so the L167 provides five available connectors. It is powered with separate 5 VDC (connection via 3pin terminal block) and designed for the placement on a DIN rail. A separate 24 VDC source is required for driving outputs and inputs.
Parker Motion Systems GroupP2M Modbus TCP/IP
I/O Interface: The P2M Industrial Ethernet node allows for a simple and cost efficient connection to any Industrial Ethernet network. It can connect three Parker valve products: Moduflex, H Micro and all five sizes of H ISO valves (15407-2 & 5599-2) to Ethernet networks
Sealevel Systems, Inc.SeaI/O-410
I/O Module: SeaI/O-410 modules provide 16 optically isolated inputs and 16 Reed relay outputs and connect to your host via Wireless 802.11b/g (Modbus TCP - 410W), Ethernet (Modbus TCP - 410E), USB (410U), RS232 (Modbus RTU - 410S), or RS485 (Modbus RTU - 410M). Inputs can range from 5-24VDC, while the Reed relays provide long life switch closures well suited to low current devices. Inputs and outputs are grouped in four-bit segments. Each group shares a common for easy wiring via removable 3.5mm terminal blocks. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-410 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-420
I/O Module: SeaI/O-420 modules provide 16 optically isolated inputs and 8 SPDT Form C relay outputs and connect to your host via Wireless 802.11b/g (Modbus TCP - 420W), Ethernet (Modbus TCP - 420E), USB (420U), RS232 (Modbus RTU - 420S), or RS485 (Modbus RTU - 420M). Inputs can range from 5-24VDC and provide 300V isolation to ground. Each output offers normally open and normally closed contact connections via 3.5mm field removable terminal blocks. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-420 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-440
I/O Module: SeaI/O-440 modules provide 32 SPST Form A dry contact Reed relays and connect to your host via Wireless 802.11b/g (Modbus TCP - 440W), Ethernet (Modbus TCP - 440E), USB (440U), RS232 (Modbus RTU - 440S), or RS485 (Modbus RTU - 440M). Reed relays offer long life performance and fast response time. Convenient removable 3.5mm screw terminals compatible with 16-30AWG wiring allow reliable connection to real-world I/O. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-440 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-450
I/O Module: SeaI/O-450 modules provide 16 channels of highly reliable SPDT Form C relay outputs rated for up to 60VDC @ 2A and connect to your host via Wireless 802.11b/g (Modbus TCP - 450W), Ethernet (Modbus TCP - 450E), USB (450U), RS232 (Modbus RTU - 450S), or RS485 (Modbus RTU - 450M). Each output offers normally open and normally closed contact connections via 3.5mm field removable terminal blocks. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-450 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-430
I/O Module: SeaI/O-430 modules offer 32 optically isolated inputs with 300V external isolation and high channel-to-channel isolation. Connect to your host via Wireless 802.11b/g (Modbus TCP - 430W), Ethernet (Modbus TCP - 430E), USB (430U), RS232 (Modbus RTU - 430S), or RS485 (Modbus RTU - 430M). Ideal for low voltage monitoring applications, connection to real world signals is made via convenient 3.5mm removable screw terminal connectors. Communicate using industry standard Modbus/RTU or Modbus/TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-430 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-462
I/O Module: SeaI/O-462 modules provide 96 bits of buffered drive TTL I/O, perfect for driving industry-standard solid-state relay (SSR) racks. Connect to your host via Wireless 802.11b/g (Modbus TCP - 462W), Ethernet (Modbus TCP - 462E), USB (462U), RS232 (Modbus RTU - 462S), or RS485 (Modbus RTU - 462M).). Each DB-78 connector brings out 48 I/O bits addressable as six, eight bit ports. For easy connection to relay racks, Sealevel offers a six-foot cable (Item# CA237) that terminates each DB-78 connector to two industry standard 50-pin IDC connectors. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-462 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-463
I/O Module: SeaI/O-463 modules offer 96 bits of buffered drive TTL I/O via four internal industry standard 50-pin header connectors and connect to your host via Wireless 802.11b/g (Modbus TCP - 463W), Ethernet (Modbus TCP - 463E), USB (463U), RS232 (Modbus RTU - 463S), or RS485 (Modbus RTU - 463M). The interface module addresses the 96 channels of I/O as 12 eight-bit ports, each programmable as input or output. Using standard 50-pin IDC ribbon cables, connect up to four industry standard relay racks for PC based control and automation of equipment including sensors, switches, security control systems, and other industrial automation systems. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-463 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-520
I/O Module: The SeaI/O-520 offers 8 high-current SPDT Form C outputs and 8 optically isolated inputs. Connect to your host via Wireless 802.11b/g (Modbus TCP - 520W), Ethernet (Modbus TCP - 520E), USB (520U), RS232 (Modbus RTU - 520S), or RS485 (Modbus RTU - 520M). Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-520 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-470
I/O Module: The SeaI/O-470 provides eight differential or 16 single-ended 12-bit A/D inputs, two 12-bit D/A outputs, 8 optically isolated inputs, and 8 open collector digital outputs. Connect to your host via Wireless 802.11b/g (Modbus TCP - 470W), Ethernet (Modbus TCP - 470E), USB (470U), RS232 (Modbus RTU - 470S), or RS485 (Modbus RTU - 470M). The A/D inputs are software selectable for 0-5V, 0-10V, +/-5V, and +/-10V ranges and each channel can be configured via hardware for measuring 4-20mA current loop. The inputs feature 5MHz bandwidth track/hold and 100ksps throughput rate. The two 12-bit D/A channels are jumper selectable for 0-5V and 0-10V output ranges. Additionally, the SeaI/O-470E module provides eight optically isolated inputs rated for 5-30VDC and feature 300V external isolation, while eight open collector outputs can sink up to 580mA - ideal for switching 24V devices commonly found in industrial environments.
SymComCIO-EN Module (non-POE) Series B
I/O Interface: Modbus TCP and Modbus RTU interface capable of providing discrete control and monitoring of an overload relay over a Modbus network.
AdvantechADAM-6022Controller: Ethernet-enabled dual-loop PID controller for general purposed PID control applications, with utility software included to set PID parameters (Pv, Mv, & Sv). Through an integrated web page, users can monitor and change the control set point through the Internet via web browser.
Calex Electronics LimitedMultifunction Indicator/Controller PPT245Controller: The PPT245 DIN-rail mounted controller is a versatile alternative to panel-mounted instruments. One analogue input is configurable for up to 18 different sensors/signals.
Calta Computer Systems LtdPLC09 ARBITRATORI/O Interface: The PLC09 Arbitrator unit (Modbus port expander or multiplexer) permits communication to a PLC or other Modbus device from a single serial port to up to three separate host computers or terminals.
Danaher Industrial Controls (West brand products)ProVU 4 Advanced Temperature ControllerController: Temperature and process controller with advanced functionality including profiling and datalogging options. Flexible I/O option boards mean the controller can be precisely matched to an application.
Deep Sea Electronics PLCAuto Start & Automains Failure Control Modules, DSE7310 & DSE7320Controller: The DSE7310 is an Automatic Start Control Module and the DSE7320 is an AutoMains (Utility) Failure Control Module. Both modules have been designed to start and stop diesel and gas generating sets that include electronic and non-electronic engines. The DSE7320 includes the additional capability of being able tomonitor a mains (utility) supply. Both modules include USB, RS232 and RS485 ports as well as dedicated DSENet terminals for expansion device connectivity.
Dold (E. Dold & Sohne KG)Digital Input/Output Module, UG 9460I/O Module: The I/O module UG 9460 has 8 digital 24 V inputs and 4 relay outputs. Via Modbus the inputs can be read and the outputs can be set individually.
Dold (E. Dold & Sohne KG)Analog Input/Output Module, UG 9461I/O Module: The universal Input/Output module UG 9461 has analog inputs and 2 analog outputs. It can be used to connect thermocouples and thermistors and offers 2 configurable measuring inputs 0-10V or 0-20mA. Via Modbus the input status can be read and the output status can be set. For the analog outputs a DC 01 ... 10 V interface is available.
Emerson Process ManagementDL8000 PresetController: The DL8000 Preset is a rugged electronic preset that provides precise custody transfer batches for petroleum, industrial chemicals, and other products. It accepts volumetric and mass inputs from turbine, Coriolis, ultrasonic, or other flow measurement devices using single or linearized meter factors.
Entertron Industries, Inc.Smart-PAK micro PLCController: Board-level micro PLCs with 12 bit analog, 7 amp relay outputs, a second serial port option, networking capabilities - for OEM applications
EurothermWi-ModPak SeriesI/O Module: Wi-ModPak series modules incorporate 256-bit encryption to ensure top level security. The line includes wireless I/O with up to eight I/O points per device and the associated expansion modules plus wireless gateways (no I/O?s) used for Modbus/Profibus communications.
Farell Instruments, S.L.UMF-100I/O Module: A Modbus RTU server remote I/O device that is interfaced to any other Modbus PLC, RTU, smart sensor or SCADA station
Galil Motion Control, Inc.RIO Pocket PLC seriesI/O Interface: Intelligent I/O handling with expanded program memory, variables, arrays and programmable PID control loops. The RIO-471x2 provides 400 lines of program memory, 254 symbolic variables, and six programmable PID loops.
Hardy Instruments, Inc.HI 4060 Rate ControllerController: Hardy Instruments' HI 4060 is a compact, single-feeder, closed-loop rate controller for use in a variety of applications, including auger, belt and vibratory-based feeders, converting them from volumetric to gravimetric.
MicroMotion, Emerson Process ManagementMicro Motion Series 3000 Net Oil ComputerController: Transmitter/controllers for point-of-process applications that require accurate process indication and focused PLC capabilities
SymComCIO-MB ModulesI/O Interface: Modbus-RTU interfaces capable of providing discrete control and monitoring of an overload relay over a Modbus network.
SyxthSense LtdPDS2-V Ventilation/General Temperature Controller with ModbusController: Ventilation controller designed to control temperature in air handling units and in ventilation plants.
United Electronic Industries, Inc.UEIModbus I/OI/O Module: When configuring a UEI Cube or RACK chassis, you may choose from a wide variety of analog input boards, analog output boards, digital I/O boards, and boards supporting a complete set of counter/timer functions including: event counting, frequency measurement, pulse-width measurement, frequency generation, pulse and PWM generation. All boards come factory pre-installed and calibrated.
UnitronicsJazz Micro PLCsController: The Jazz MicroPLC is a low-budget, full-function PLC with onboard I/O and a built-in Operator Panel.
ABB LtdABB S4C+ Robot ControllerController: The S4C+ Robot Controller with the ModBus option allows the Robot to act as both client and server on the factory ModBus TCP Network. No additional hardware needed to upgrade to ModBus if you are already a S4C+ owner. ABB currently has more than 100,000 robots supplied worldwide. The combination of patented software, precision hardware and total committment results in faster acceleration, as much as 25% better workcycle times, lower energy consumption and a MTBF (Mean-Time-Between-Failure) design specification of 50,000 hours.
ABB LtdUniversal Motor Controller UMC100.3Controller: UMC100.3 is a flexible, modular and expandable motor management system for constant-speed, low-voltage range motors. Its most important tasks include motor protection, preventing plant standstills and reducing down time. Early information relating to potential motor problems and swift diagnosis ensure continuous operation of any application.
Advanced Micro Controls IncAnyNET I/O ANE2 2-Channel SSI InterfaceI/O Interface: AMCI's ANE2 connects a wide variety of SSI sensors to your PLC using a standard network connection, and it programs using the host controller's (PLC) native software.
Advanced Micro Controls IncNexus Distributed I/O: High Speed PLS ControllerI/O Module: High-speed Programmable Limit Switch (PLS) controllers that use an incremental encoder or resolver for position feedback, and provide up to 16 I/O points. Compatible with a wide variety of PLCs that support Modbus TCP and many other industrial networks, these units control the outputs independently from the PLC scan, enabling them to achieve a high-speed update time of 100µs. The NEXUS plugs into the network (not the PLC/PAC) allowing for installation in a remote location convenient to the application, greatly reducing cabling time and costs.
Advanced Micro Controls IncNexus Distributed I/O Multi-Axis Stepper Motor ControllerController: Multi-axis stepper motor controllers that can simultaneously control the position and velocity of up to four stepper motors. Its built-in network interface makes it simple to connect to a wide variety of PLCs that support Modbus TCP and many other industrial networks. The NEXUS plugs into the network (not the PLC/PAC) allowing for installation in a remote location convenient to the application, greatly reducing cabling time and costs. Encoder feedback for move verification is also available.
Advantage Engineering, Inc.Advantage Sentra 300Controller: The Advantage Sentra 300? temperature control unit provides heating and cooling at elevated temperatures by circulating a temperature stabilized fluid through your process. The unit requires an external source of water for system filling, pressurizing and cooling. The minimum water supply pressure is 55 psi to operate up to 300?F.
AdvantechADAM-5510EKW/TPController: The ADAM-5510EKW/TP is an Ethernet-enabled SoftLogic Controller. In addition to the features of ADAM-5510KW and ADAM-5510EKW, the ADAM-5510EKW/TP has Ethernet features including Modbus/TCP Server, Modbus/TCP Client and Multiprog via Ethernet functions. Users can easily and quickly complete their programming based on Ethernet architecture.
AdvantechADAM 6000 Series Digital Input and Relay ModulesI/O Interface: High power relay output module designed to meet the requirements of higher voltage applications.
AdvantechAPAX-5070I/O Interface: High-density Modbus TCP Remote I/O coupler module that allows any PC, controller, or HMI device that supports Modbus TCP to add remote I/O functionality to access data and perform read and write actions.
AMASS Data Technologies Inc.Embedded Control Digital I/O ModuleI/O Module: The ECDIO Digital I/O Module is a compact DIN-Rail mountable, full-function, digital I/O subsystem that is compatible with the following RS485 multi-drop networking protocols: AMASS Data?s ECN, SDI-12/RS485 and Modbus RTU. The ECDIO provides firmware-based intelligent digital I/O functions for its 24 I/O lines and uses the ECN, which supports up to 32 modules over a distance of 4000 feet on single or dual twisted pair cable.
AMASS Data Technologies Inc.Analog to Digital Conversion Module, PAIMI/O Module: The AMASSER PAIM is an 8-channel analog input module in the form of a standalone SDI-12 device providing A/D conversion (16-bit resolution) as well as excitation ports. It also includes 3 channels for period measurements and 3 for frequency measurements. The PAIM provides an interface for SDI-12 loggers that are to be connected to various non-SDI-12 sensors, such as for weather monitoring. This A/D converter is a standard feature on our PDAS-II data loggers.
American Industrial Systems Inc.Touch Panel PCController: 7 inch widescreen fanless touch panel PC designed for building, factory automation, SCADA, and human-machine interface (HMI) applications.
Antx, Inc.Elite Gas ControllerController: The Elite Gas Controller is a system manager for detecting toxic gases, combustibles, or oxygen hazards.
APEX Automation Technologies GmbHPAD-250e, Models 20102050, 20102051, 20102052, 20102053Controller: The PDnetIP-Controller PAD-250e is an active PAB1-networking node. The PDnetIP-Controller PAD-250e is applicable in Schneider Electric's Modicon TSX A 250. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC-1006 the PAD-250e provides communication to diverse terminal devices. Additional interfaces for the PAD-250e Controller satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-volatile setup memory of the PAD-250e controller. Either the communication between the PAD-250e Controller and SPS will be handled via the provided Special Function Blocks (SFB) or the controller substitutes Modnet-Controller types BIK-114, KPH-141 and KPM-111 for ICOS-communication.
APEX Automation Technologies GmbHPAD-120e, model 20102030 & 20102032Controller: The PDnetIP-Controller PAD-120e is an active PAB1-networking node. The PDnetIP-Controller PAD-120e is applicable for Schneider Electric's Modicon TSX Compact A120. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP the PDnetIP-Controller PAD-120e allows communication with diverse terminal devices. The necessary information for communication is configured by the APEX-Software NetPro in advance and is stored in non-volatile memory. Communication between the PAD-120e Controller and SPS is handled via Special Function Blocks (SFB).
APEX Automation Technologies GmbHPAD-740e, models 10102020 & 10102022Controller: The PDnetIP-Controller PAD-740e is an active PAB1-networking node for the Siemens S7-400. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with a 100Base-FX MT-RJ connector and the protocols Modbus TCP, RFC-1006 and VDM, the PDnetIP-Controller PAD-740e allows communication with diverse terminal devices. The necessary information for communication is configured by the APEX-Software NetPro in advance and stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-740e Controller and SPS is handled via the provided Special Function Blocks (SFB).
APEX Automation Technologies GmbHPAD-250MAe, models 20102090 & 20102092Controller: The PDnetIP-Controller PAD-250MAe is an active PAB1-networking node. The PDnetIP-Controller PAD-250MAe is applicable in the DTA-112 and DTA-113 rack. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, the PDnetIP-Controller PAD-250MAe allows communication to diverse terminal devices. Additional available interfaces for the PAD-250MAe satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-250MAe Controller and DTA is handled via PAB1-Interface.
APEX Automation Technologies GmbHPAD-140e, PAD-140twin, models 20102070, 20102071, 20102072 & 20102073Controller: The PDnetIP-Controller PAD-140 is an active networking node for Schneider Electric's Modicon Quantum 140. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, RFC1006 and OpenTCP, the PAD-140 affords the communication to diverse terminal devices. Additional available interfaces for the PAD-140 satisfy many requirements for open communication networks.The installation of the PAD-140 is easy, simply plugging into the base rack of the SPS.
APEX Automation Technologies GmbHPAD-5035e, Models 20102040, 20102041, 20102042, 20102043Controller: The PDnetIP-Controller PAD-5035e is an active PAB1-networking node applicable in Schneider Electric's Modicon A350/A500. Equipped with an Ethernet 10/100Base T RJ45 connectors and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC-1006 the PDnetIP-Controller PAD-5035e communicates with diverse terminal devices. Additional available interfaces for the PAD-250MAe satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-5035e Controller and SPS will be handled via the provided Special Function Blocks (SFB) or the controller substitutes the Modnet-Controller types BIK-151, KP1, KOS 152 (SEA 1) and KOS 882 (SEA 1) for ICOS-communication.
APEX Automation Technologies GmbHPAD-800e, Models 20102060, 20102061, 20102062, 20102063Controller: The PDnetIP-Controller PAD-800e is an active PMB-networking node. The PDnetIP-Controller PAD-800e is applicable in the LOGISTAT CP80-A800/Logidyn D. Equipped with an Ethernet 10/100Base T RJ45 connector and optionally with an 100Base-FX MT-RJ connector and Modbus TCP, ICOS/TCP and RFC1006 the PDnetIP-Controller PAD-800e communicates with diverse terminal devices. Additional available interfaces satisfy many requirements for open communication networks. Configuration is done with the APEX-Software NetPro in advance and is stored in the non-condensing setup memory of the PDnetIP-Controller. Communication between the PAD-800e Controller and SPS is handled by the provided Special Function Blocks (SFB) or the controller substitutes the Modnet-Controller type SEA 1 in terms of an ICOS-communication.
ApprionIONizer ConnectI/O Interface: Apprion's IONizer Connect provides interfacing and backhauling data from legacy sensors and real-time communication between critical data points in the network.
Ascon Tecnologic Inc.Microprocessor-Based Thyristor Power Controllers (TH-S, TH-A, and TH-P)Controller: Complete set of single-phase, three-phase economy, and three-phase power controllers with a wide range of nominal voltages and currents. Different operation modes allow use with any type of load, Internal diagnostic and load monitoring functions ensure safe operation.
Ascon Tecnologic Inc.sigmaPAC Programmable Automation ControllerController: Distributed automation solution with fieldbus
Ascon Tecnologic Inc.sigmadue Series I/O ModulesI/O Module: Modbus remote I/O modules
Ascon Tecnologic Inc.AC Series Multifunction PLCsController: A Multiloop controller, Micro PLC for logic sequences, a powerful Process Computer combined in one instrument.
Ascon Tecnologic Inc.DeltaDue DIN Rail Controllers (D1, D2, D3, D7, D8, and D9)Controller: Product family of temperature controllers with data acquisition and I/O modules
Ascon Tecnologic Inc.Gamma2 Panel Mount Controllers (C1, M1, M2, M3, M4, M5, X1, X3, X5, Q1, Q3, and Q5)Controller: Family of Universal Controllers, Set-point Programmers-Controllers, and Indicators
Ascon Tecnologic Inc.sigma microPAC®Controller: Programmable Automation Controller (PAC) with on-board I/O and expansion capability
Athena Controls, Inc.Series DS Digital Staging ControllerController: The Series DS Digital Staging Controller is capable of driving contactors for up to ten heaters or cooling devices to maintain a process at setpoint.
b-plus GmbHSmart_MODI/O Interface: Smart_MOD easliy connects devices and systems with a serial RS-232 interface to Modbus
Bachmann electronicM1 (M200 series)Controller: Industrial controller family (M200 series) consists of a full range of individual modules connectable via a backplane to customized automation solutions. All popular analog and digital I/O signal levels as well as functional modules for PWM, counting, positioning or advanced data acquisition are available.
Barix AGBarix X8I/O Interface: Decentralized, digital Modbus I/O to RS-485 converter
Barix AGBarix IO12I/O Module: Digital I/O unit for remote I/O automation
Barix AGBarix R6I/O Interface: DIN-rail mountable Modbus RTU relay unit for building and industrial automation
Barix AGBarionet 50Controller: Low-cost IP automation controller, monitoring device, and visualization system
Beckhoff GmbHModbus Bus Terminal Controller, BC7300Controller: Beckhoff's Bus Terminal Controllers are Bus Couplers with integrated PLC functionality. The BC7300 controller has a fieldbus interface for Modbus, which can be used as a non-central intelligence in the Modbus system. The Bus Terminal Controllers are intelligent servers. One unit consists of a Bus Terminal Controller, any number of terminals between 1 and 64, and a bus end terminal.
Bee Instruments (Madhu Group of Companies)Programmable On/Off Controller, FC96AController: Programmable on/off controller
BinMasterBinMaster C-100MBController: Modbus-compatible control console for SmartBob Inventory Management System
Black Mountain ControlsMT1 ModbusI/O Module: The MT1 Modbus converts 4 analogue input signals to digital data, based on Modbus RTU and transmits them via RS485. The 4 inputs are selectable from current, voltage, resistance and temperature. Any combination of inputs is possible from one input of each type to 4 times the same input. The MT1 has a USB port for easier settings and firmware updates.
Brainchild Electronic Ltd.IO 6RTD ( 6 RTD inputs )I/O Module: Modbus-based I/O modules for data acquisition and other applications
Chipkin Automation SystemsModbus Weather ServerI/O Interface: Chipkin has set up weather servers on the open internet. They are there for anyone to use for any purpose. The data is available for USA and Canada and zoned according to postal/zip codes. Real Time Weather Data is made possible through Modbus. This is especially helpful in providing sunrise and sunset data for HVAC systems. Modbus Weather Data (BMS Weather Data) can help you increase your bottom line.
Chipkin Automation SystemsCAS Modbus ScannerI/O Interface: CAS Modbus Scanner is a utility to retrieve coils, inputs, holding registers, and input registers from a Modbus-enabled device. Values retrieved from the device can be viewed in many different formats, including Binary, HEX, Uint16, Int16, Uint32, Int32, and Float32. This utility can also discover Modbus devices on your network if you do not know their address. It works by testing every address, function, length, and offset to check for exceptions or responses.
Chromalox®, Inc.Multiloop Controller 3340Controller: The 3340 can control up to 4 channels in a compact 1/4 DIN package. The 3340 has a straight forward user interface that does not require a PLC programmer or other support hardware to operate. The display, pushbuttons, outputs and software are integrated in this single multi-loop package.
Compressor Controls CorpSeries 5 Reliant Turbomachinery ControllersController: Purpose-built, Fixed I/O-configuration controllers with IEC-61131 Programming Languages
Control Microsystems Inc.SCADAPackController: Control Microsystems SCADAPack PLC series includes five models. The SCADAPack is a flexible controller with integrated power supply, analog and digital I/O and serial communications. The product uses Modbus RTU, Modbus ASCII and optional DNP3 as native protocols and is remotely programmable through a choice of flexible programming languages. SCADAPack is based on a multiprocessor architecture with a co-processor used for handling on-board input/output channels. Modbus-TCP capable versions available as well.
Control Microsystems Inc.FlowStation 11O Pump Station ControllerController: Complete Pump Station Controller, targeted for use in storm and waste water lift stations, and simple pump-up applications.
Control Systems International, Inc.UCOS Field Control Unit (FCU)I/O Interface: The UCOS Field Control Unit directly scans and controls multiple brands of I/O modules and executes event-driven logic.
Control Technology CorporationBlue Fusion Automation Controller, Model 5100Controller: The Blue Fusion family of web based controllers, combines fully configurable I/O, motion control and enterprise connectivity into a single compact package at a price that's lower than many non-networking controllers. With built-in 10/100 Base T Ethernet, the 5100 supports the protocols that put your devices on the Web over secure connections, including: HTTP, SOAP, SMTP, RMI, Modbus/TCP, XML & SQL.
Control Technology CorporationBlue Fusion Automation Controller Model 5200Controller: The Blue Fusion 5200 is a high-performance programmable automation controller designed for industrial discrete and process control applications. CTC's Blue Fusion controllers combine the features of a PLC, motion controller and PC into a small DIN rail mountable package. The controller can be used in a stand-alone configuration or it can be easily networked via its serial and LAN connections. The built-in Web server makes Internet or intranet access a snap. For larger applications, the 5200 supports up to three expansion racks allowing over 192 I/O points to be managed by a single system. The 5200 Supported IT and Web Standards are: HTTP, SMTP, POP3, Modbus/TCP, XML, SOAP, & SQL/JDBC.
Control Technology CorporationBlue Fusion Model 5223 ControllerController: The Blue Fusion model 5222 and 5223 automation controllers use patented CTC technology to serve up interactive web-based HMI projects. The projects are created on a PC using CT HMI Builder, CTC's graphical development software. Once the project has been created, CT HMI Builder converts the project to a CT webHMI project and exports it directly to the Blue Fusion controller. The CT webHMI project in the controller can then be accessed by any number of authenticated users via standard web browsers.
Control Technology CorporationSeries 2700AP Series Automation ControllerController: The 2700 Series programmable automation controllers use advanced technology, including a highly integrated plug-in CPU, to attain performance that exceeds the response metrics of much more costly systems. This performance level, combined with the controller's 128K user memory capacity and extended I/O and step capacities, makes the 2700 Series appropriate for any application that demands ultra fast response times or real-time, multitasking machine control. A multi-processor architecture distributes the workload, thereby increasing system performance. Multitasking for up to 84 independent tasks and advanced motion control commands enable you to design sophisticated solutions for the most complex applications.
Control Technology CorporationModel 5222 Blue Fusion Web Enabled ControllerController: The Blue Fusion Model 5222 is a high performance programmable automation controller designed for industrial discrete and process control applications, which also has an embedded web server. CTC's award winning Blue Fusion Model 5222 controllers combine the features of a PLC, motion controller and web server into a small DIN rail mountable package. The Model 5222 has powerful networking and control features including CT HMI support, data logging, FTP client support and 5 MB flash memory. Using the 5222, one can remotely set up, control, and maintain complex control applications over Internet or Intranet connections, using no more than a web browser. The 5222 supports up to 192 I/O points or 12 axes of servo and stepper motion, alarm-generated emails and embedded video and customization via C/C++ providing a rich and flexible control strategy.
Control Technology CorporationBlue Fusion Model 5300 ControllerController: The Blue Fusion Model 5300 is a high performance programmable automation controller designed for industrial discrete and process control applications. CTC's award winning Blue Fusion controllers combine the features of a PLC, motion controller and PC into a small DIN rail mountable package. The controller can be used in a stand-alone configuration or it can be easily networked via its serial and LAN connections. The built-in web server makes Internet or intranet access a snap. For larger applications the Model 5300 supports up to 1024 I/O points and up to 16 axes of motion control.
ControlByWeb (Xytronix Research and Design, Inc.)X-DAQ-8A5-II/O Module: The X-DAQ-8A5-I Analog Module is an industrial-grade, Ethernet data acquisition module with eight analog inputs. Users can view the value of the analog inputs using a web browser or a custom application. The Analog Module can be set up to accept either eight single-ended analog signals, four differential analog signals, or a combination of single ended and differential inputs.
ControlByWeb (Xytronix Research and Design, Inc.)DAQ Series Five Input ModuleI/O Module: The DAQ Series Five Input Module comes equipped with five opticallyisolated, digital inputs. Each input can be used to monitor the state of a digital signal. The inputs can be used to trigger email alerts based on a single change of state or after a number of state changes. The inputs can also be used as counters, or to control the relay contacts of other ControlByWeb? products that are located in remote locations.
ControlByWeb (Xytronix Research and Design, Inc.)Temperature Module X-DAQ-2R1-4T-II/O Module: The DAQ Series Temperature Module can be used to monitor temperatures within the range of -55C to +125C. It can monitor up to four different temperature sensors. It also is equipped with two electro-mechanical relays that can be triggered using a temperature value, controlled independent of temperature and independent of each other.
ControlByWeb (Xytronix Research and Design, Inc.)WebRelay, X-WR-1R12-1I24-II/O Module: WebRelay is an electro-mechanical relay with a built-in web server. It can be controlled and/or monitored over any IP network. Users can also operate WebRelay? without user intervention. WebRelay? also can be operated by using the optically isolated input. The input can be configured to turn the relay on/off, pulse the relay, toggle the relay, latch the relay, etc. The input can also be used to control a relay at a remote location or simply monitor the status of a digital signal.
ControlByWeb (Xytronix Research and Design, Inc.)WebRelay-Quad, X-WR-4R1-II/O Module: WebRelay-Quad is a compact four-relay module with a built-in web server. It can be controlled and/or monitored over any IP network including private networks, IP-based industrial control networks, and the Internet. Users can also use a custom application to control and monitor the device. WebRelay-Quad has four low-signal relays that can individually switch up to 1 Amp at 28V.
ControlByWeb (Xytronix Research and Design, Inc.)X-300-II/O Module: The X-300 is a powerful web-based instrument for remote temperature measurement, logging, and alarming. In addition, the X-300 can function as a full-featured 7-day programmable thermostat for single stage HVAC systems.
ControlByWeb (Xytronix Research and Design, Inc.)WebRelay-Dual, X-301-24II/O Module: WebRelay-Dual is an Ethernet-based, high-performance, mini I/O module that has two electro-mechanical relays, two optically-isolated inputs, nonvolatile memory for logging, and a real-time clock for full-calender scheduling. Users can manually operate the device, or configure it to automatically turn relays on/off at preset times.
Coyote DataCom, IncRIO9 Multi-IO BoardI/O Module: The RIO9 Multi-IO board provides an easy way to use any of the radios in the CDR-915 family to transmit analog and digital signals. All I/O features transient protection against damage.
Coyote DataCom, IncRIO-10 Multi IO BoardI/O Module: The RIO-10 Multi-IO board provides an easy way to collect analog and digital signal information and in many instances can completely eliminate the need for an RTU at remote points. All I/O has transient and over voltage protection.
CSE-SemaphoreSemaphore G3 Remote I/O ModuleI/O Module: The Semaphore G3 Remote I/O Module enables remote monitoring and control in a broad range of applications. It can be operated as remote I/O or in a back-to-back mode. Remote I/O modes support Modbus and Kingfisher protocols, which readily drop into practically all SCADA systems. In back-to-back mode, two G3 Modules make up a system that operates as a wire replacement, which is ideal for secure I/O transfer in any application. Since it supports Modbus RTU server, the G3 can readily be added to a broad array of existing PLCs, RTUs, and SCADA HMIs using RS-232 or RS-485, or wireless with the proven Maxstream spread spectrum radio.
DAE InstrumentSIO270I/O Module: The SIO series is a distributed I/O solution with modular construction for maximum flexibility. Its powerful on-board intelligence makes it well suited to SCADA applications. The quick release plug in I/O modules are fully isolated (input to power, output to power ) and surge protected for high system reliability.
Data Track Process InstrumentsTracker 300 SeriesController: The Tracker 300 series is a DIN Rail-mounted, multifunctional PID Controller, signal conditioner, and trip amplifier with RS485 MODBUS RTU communications.
DataNAB, LLCMBUS_IO3I/O Module: Using the Modbus registers, the MBUS_IO3 module can be configured as a Generic Modbus I/O board with built-in and/or external temperature sensors, a 0-10V temperature transducer, a Tstat controller for Fan Coils, Heat Pumps, Radiant heat, VAV control, etc.
DataNAB, LLCDataNab AiO8I/O Module: Modbus 8 Channel Analog Input/Output Module
DATAQ Instruments, Inc.DI-900MB ModulesI/O Module: Din rail mountable analog and discrete I/O modules that support the Modbus-RTU protocol for distributed I/O applications.
Delta Computer Systems, Inc.RMC70 Series One- and Two-Axis Motion ControllersController: One- and Two-Axis Motion Controllers
Detcon Inc.Model X40 Series control systemController: The X40 Series controllers provide an extensive list of Input and Output capabilities that allow for use in almost any control system integration design. Standard outputs include Common Alarm Relays and Modbus Interface. Optional Outputs include 4-20 mA, Webserver Interface, and an Alarm Voting Module. The RS-232 port is standard and is used for uploading configuration data or downloading Data Logging results.
Deutschmann Automation GmbH & Co. KGLOCON 200-MBController: Cam control with integrated ModbusRTU interface
Dexdyne LtdNetrix 9000Controller: The netrix 7000 is a fully embedded web server integrated with popular industrial protocols, a range of standard I/O options, and a choice of communications links.
DGH CorporationDIN-100 SeriesI/O Module: The DIN-100 Series Sensor to computer modules are a family of data acquisition modules that convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. The modules can measure temperature, pressure, voltage, current, digital input or digital output signals. The modules provide direct connection to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus RTU data values.
Divelbiss CorporationBoss 32 Controller, BOSS32B-x-x-xController: The Boss 32 is a fully integrated, 32-bit operator interface and multifunctional microcomputer. Powerful and versatile, the Boss 32 provides control of multiple control functions such as temperature, pressure, speed, position, counting, communications and monitoring.
Divelbiss CorporationUniversal Machine Controller, UMCB-xxxController: The Universal Machine Controller (UMC) is a fully integrated, 32-bit microcomputer. Powerful and versatile, the UMC provides power over multiple control functions such as temperature, pressure, speed, position, counting, communications and monitoring.
Divelbiss CorporationPLC on a Chip, PLCHIP-M2-2562xController: Designed to provide embedded intelligence in OEM products, PLC on a Chip? is a cost-effective programmable logic controller packaged in a single integrated circuit. All I/O and integrated functions are pre-assigned for use within the Divelbiss EZ Ladder? PC based, industrial ladder diagram software. The full featured PLC on a Chip controller and EZ Ladder combination provides for solutions that are both versatile and easy to implement.
Divelbiss CorporationPLC on a Chip Control System (PCS), PCS-xxxController: Designed for speed, the PCS series of programmable logic controllers replaces the High Density Bear Bones product while adding expanded features and versatility. These features include analog I/O capabiliy, expanded communication ability via a CAN network with J1939 support, Sychronous Serial Interface (SSI), truly high-speed counting, and broad frequency range Pulse Width Modulation (PWM) outputs. Based on PLC on a Chip? technology, the controller is easy to apply and program using the EZ Ladder PC based software.
Divelbiss CorporationEnhanced Baby Bear Controller, ICM-EBB-700Controller: The Enhanced Baby Bear series of programmable logic controllers offers dimensions and mounting identical to the original Baby Bear product while adding expanded features and versatility. Based on PLC on a Chip? technology, the controller is easy to apply and program using the EZ Ladder PC based software. The base control board offers 5 inputs and 5 outputs with maximum expansion capability to 120 in and 120 out using standard expander modules.
DRI-STEEM CorporationVapor Logic4 ControllerController: Vapor-logic comprehensive control for DRI-STEEM GTS humidifiers. Vapor-logic4 offers the same functionality as Vapor-logic3 controllers, plus several new features: Web interface; Modbus, BACnet, and LonTalk to allow interoperability with multiple building automation systems (BAS); Up-time optimizer
DynaGen TechnologiesGSC400Plus Genset ControllerController: The GSC400 is designed to provide complete control, protection, AC metering, and engine instrumentation for both standard and electronic engines and gensets. The module is configured using both the front panel buttons or our PC configurator software. The GSC400 provides direct mounting compatibility with other DynaGen controllers such as the GSC300 to allow for a full range of options to fit the application. A Modbus/RTU Port is provided for connection to remote annunciators, SCADA systems, as well as options for remote monitoring over Internet and cellular.
Endress+Hauser Process SolutionsRMM621 Application ManagerController: The RMM621 is a single device signal analysis solution for use in process instrumentation. The device performs a variety of tasks including data recording, calculation and control.
Ethernet Direct CorporationRMW-824I/O Module: Industrial 8-channel digital output and 8-channel digital input Ethernet module with 32-bit counters
Eurotherm2500 Intelligent Data Acqusition and Precision Multi-Loop PID ControlController: multi-loop controller and data acquisition system
Festo AG & Co. KGCoDeSys Embedded Controller CPX-CECController: Embedded controller ideally adapted for pneumatics and motion applications with up to 31 electric drives.
Finesse SolutionsTruLogic ControllerController: The TruLogic? Controller is powered by a DeltaV Controller capable of controlling up to eight (8) bioreactors per controller. Each controller can be networked with additional TruLogic? Controllers to create a control network capable of managing several hundred bioreactors. Additionally, as an OPC Client/ Server the TruLogic? Controller is capable of interfacing with new or existing 3rd party devices such as controllers, analyzers and more.
Flow Line Options Corp.Consolidator 4Controller: ConsoliDator is a multiple-channel controller. It accepts 4-20 mA inputs, flow meter pulse inputs, and digital inputs. It is equipped with multiple relays, which all have user-definable actions, 4-20 mA outputs, and Modbus protocol communication capabilities.
Flowserve CorporationValtek Logix 2000 Digital PositionerController: The Flowserve Logix 2000 is a digital positioner with on-board PID control. Communications are either 4-20mA or Modbus. A PID controller mounted on the valve updates the valve stem position 16 times per second thus reducing control system lag. The Logix 2000 has error reporting capabilities and extensive valve diagnostics. The unit is completely configurable through the user interface screen, no external configuration device needed.
FreeWave Technologies, Inc.IO Expansion ModuleI/O Interface: The IO Expansion Module may either be stacked on an applicable IO radio or can serve as an expandable remote IO solution through a serial connection.
Galil Motion Control, Inc.IOC-7007 I/O ControllerI/O Interface: The IOC-7007 I/O controller provides an intelligent solution for handling inputs and outputs. The IOC-7007 controller base accepts up to seven Galil I/O IOM modules. IOM modules are available with TTL inputs, optoisolated inputs, optoisolated outputs, high power outputs, dry contact relays, analog inputs and analog outputs.
GE Consumer & IndustrialA-Series Lighting Control PanelsController: A-Series Lighting Control Panels provide programmable control of the breaker. The integration of the controller provides space savings over traditional external relay panels. The A-Series Lighting Control Panel can be stand-alone or networked into a building automation system.
GE Consumer & IndustrialDurus ControllersController: Durus Controllers are designed for simple control applications such as light control, gate control, HVAC, pump control and more.
GE Consumer & IndustrialTranSphere TS Wireless I/OI/O Interface: Family of wireless communication products for analog and discrete I/O signals
GE Fanuc AutomationVersaMax® Micro PlusController: VersaMax Micro Plus controller, enhanced to support Modbus TCP Client and Server
GEFRAN Inc.GF_VEDO 35CTController: All-in-One HMI, SoftPLC and remote I/O integrated in a single product.
GEFRAN Inc.GF_PROMERController: GF_PROMER is a time-variable setpoint programmer, 4-loop controller, graphic trend and bargraph display, all in a single device
Grid Connect Inc. (formerly Synergetic/Lantronix)Industrial Modbus TCP Ethernet to Modbus RTU/ASCII Serial ControllerController: The DR2-MB is a Modbus industrial device server packaged in a din-rail mountable plastic housing that uses screw terminals and RJ45 to connect the 24VDC power and your serial ports.
Guangzhou ZHIYUAN Electronics Co., Ltd.NDAM Serial I/O ModuleI/O Module: NDAM Distributed Data Collection Control System is a data collection system based on the new generation of brick structured network device system. It adopts the modularized structure, so that users can flexibly combine data collection modules to satisfy different functional requirements for different applications. The NDAM system can achieve a remote data collection via sensors or perform remote control of devices in the field. The NDAM system adopts the standard Modbus protocol and is compatible to most PAC and systems.
Hach Companysc1000 Multi-parameter Universal ControllerController: The Hach sc1000 Multi-parameter Universal Controller is a fully modular system consisting of a Display Module and one or more Probe Modules. The Display Module and Probe Module must be ordered separately.
Hach CompanyMOD I/O Modbus Interface, 115 VacI/O Interface: Modbus /O Interface
Hach Companysc200 Digital 2-channel ControllerController: The sc200 controller is compatible with 40+ sensors of digital and analogue Sensors, from Ammonium to Turbidity as well as special parameters such as Oil in Water. Its plug-and-play, mix and match lets it fit into any facílity or workflow.
Hardy Instruments, Inc.HI 4050 Weight ControllerController: This weight controller/weight indicator acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone for simple control or weight monitoring.
Heliodyne, Inc.Delta-T Pro ControllerController: Delta-T Pro control units monitor the solar hot water system and sense when there is solar energy to be collected to automatically activate the circulation system.
IAS Irrigation SystemsIAS XR3000, Agent™Controller: The IAS XR3000 Agent™ Configurable Logic Controller exemplifies a new, more accessible form of automation controller. It allows users to implement and manage their own automation needs for many types of installations ranging from automated irrigation control, crop monitoring, reservoir management, and many other applications. It supports up to eight wireless sensors and can control up to eight independent outputs. All functions are accessible via any mobile device or Internet-connected computer with a browser. Notifications can be sent to any number of users via SMS, email or voice.
ICP DAS USA, Inc.M-7000 Series ControllersController: The M-7000 series is a family of network data acquisition and control modules that support Modbus RTU and DCON protocols. With the Modbus RTU protocol, it easily communicate with most popular SCADA/ HMI software and PLC. It has the same form factor as the I-7000 series.
ICP DAS USA, Inc.uPAC-7186EG/DController: uPAC-7186EG/D is an Advanced Ethernet ISaGRAF uPAC. It can send emails with an attachment to up to 10 recipients at a time. It has a data acquisition auto reporting system. ISaGRAF PACs can use UDP IP Client to auto-report acquisition data & control data to local or remote internet PC/Server. uPAC-7186 controllers have RS-485, RS-232, Ethernet, and Modbus RTU/TCP communication ports.
ICP DAS USA, Inc.TPD-280 Touchscreen ControllerController: TouchPAD is a tiny touch screen controller HMI which is designed for building and home automation. TPD-280 is equipped with a high resolution TFT color touch screen and fits in regular electrical wall-mount outlets. TPD-280U features a real time clock and a USB port for convenient interfacing with a PC.
ICS ElectronicsGPIB-to-Modbus Interface, Model 4899I/O Interface: The GPIB-to-MODBUS Interface converts simple ASCII commands into Modbus RTU messages. It provides both single ended RS-232 and balanced RS-422/RS-485 serial signals, and connects to single and multiple Modbus devices. The product is IEEE-488.2 compliant and meets latest GPIB Standards.
ICS ElectronicsGPIB-to-MODBUS Interface Board, Model 4809I/O Interface: The GPIB-to-MODBUS Interface Board converts simple commands into Modbus RTU messages; Provides both single ended RS-232 and balanced RS-422/RS-485 serial signals. It can control multiple Modbus devices. The GPIB Interface is IEEE-488.2 compliant and meets latest GPIB Standards.
ICS ElectronicsOEM GPIB-to-RS-232 MODBUS Interface, Model 4819I/O Interface: The Model 4819 uses simple GPIB commands to control RTU Modbus devices. It provides GPIB-to-RS-232 and RS-232-to-RS-232 data paths to Modbus device. User selects GPIB or RS-232 control of the Modbus device. The GPIB Interface is IEEE-488.2 compliant and meets latest GPIB Standards. Saves GPIB address, Serial settings and user's IDN message in Flash. Personalizes board as part your end product.
IDEC CorporationMicroSmart PLC FC6 familyController: The MicroSmart FC6A series is available in two types of CPUs: Plus and All-in-One. The Plus type has a dual RJ45 Ethernet port, embedded web server functions and the capability to expand up to 2060 I/O, while the All-in-One type has an embedded serial port and RJ45 Ethernet port capable of expanding up to 520 I/O.
Industrial Scientific Corporation4800 ControllerController: The 4800 Controller is an 8-48 analog input controller, which can also monitor up to 72 digital ModBus RTU inputs.
Integrasense IncorporatedTru-Carb Carbonation ControllerController: The Tru-Carb Carbonation Controller is a solution optimized for brewery and carbonated liquid management. It eliminates the guess work or need for lookup tables or continual samples and subjective Carbonation Test gauge measurements. The system is provided in a wash down industrial Polycarbonate enclosure with clear front protective cover, an integrated flow control / meter for the Carbon dioxide, a 3.5 inch color operator touch screen and integrated power supply, inputs and outputs, and relays. The system provides intelligent calculation and automated control of the carbonation level by monitoring the liquid temperature, tank head pressure and flow rate setting. The operator can setup and monitor the system via the operator interface. Integrated Modbus RTU / RS-485 communications allows the controller to be remotely monitored or to change set points. An optional master batch and recipe controller can be coupled with both fermentation and carbonation controllers to provide a fully integrated cellar control solution.
IpsilIP8930Controller: The IP?8930 is a small (33.2mm x 34.5mm) TCP controller module to add intranet/Internet-based monitoring and control to an application. The IPu8930 can also be used as a serial-to-Ethernet bridge. Add an RJ-45 and a power source and you're ready to access up to eight different devices such as 4-20ma sensors or dry contact relays. A developer kit is also available.
Jetter AGJetControl 647 PLCController: PLC with Ethernet, Internet-Technologies and integrated motion control
Jetter AGJetMove 2xx Servo Controller/AmplifierController: Servo Controller/Amplifier with Ethernet-Interface
Jetter AGJetControl 24x PLCController: PLC with Ethernet, Internet-Technologies and integrated motion control
JUMO GmbH & Co. KGcTRON Compact controllerController: Freely configurable and universally applicable compact controllers in various DIN formats for controlling temperature, pressure and other process variables.
JUMO GmbH & Co. KGdTRANS Lf 01 Transmitter/ControllerController: This instrument measures and controls the conductivity of aqueous solutions.
K-TEK CorporationKVIEW100 Multi-Channel ControllerController: Multi-channel controller with Modbus RTU Communications
KeleVA301C Gas Detection ControllerController: The VA301C Gas Detection Controller provides continuous monitoring of up to 96 inputs/outputs, on three channels, at distances up to 2000 ft. Modbus communication channels are included, and a BACnet communication module is available.
Kessler-Ellis ProductsLEVELtrol II (LT2)Controller: The LEVELtrol II (LT2) Flow Computer is a level indicator for use with a variety of level sensor types in liquid applications. The LT2 can be used for level monitoring, level control and level batching (batch by level).
Klockner-MoellerPS416 ControllerController: The PS416 is used for the control of complex processes, from measured value monitoring, to calculation of control algorithms, to the control of actuators. Its modular construction and large range of available cards enable solutions to be designed for every branch of industry. Distributed peripherals are easily connected via a number of different fieldbus systems.
Korenix Technologies Co., Ltd.JetI/O 6550I/O Module: JetI/O 6550 is a Block I/O module equipped with 14 channels Digital Input, 8 channels Digital Output connectors. JetI/O 6550 provides 16-bit resolution and high accuracy. It supports event counter for DI mode, pulse output for DO mode. The flexible Conditions&Go (IF-Then) rules help users define intelligent logic rules for remote I/O control.
Korenix Technologies Co., Ltd.JetBox 5300-w Embedded Linux Computer Controller: The JetBox 5300-w embedded Linux computer is designed for front-end industrial control deployments. The RISC-based computer with low power consumption features two LAN ports, two USB ports, two RS232/422/485 and two RS232 serial ports. The JetBox 5300-w allows users to integrate alarms, indicators, and sensors into their complex networking with Modbus TCP devices.
Leroy Automatique IndustrielleTES Remote I/O Logic and Analogue TerminalI/O Interface: The TES is a remote I/O logic and analogue terminal for RS485 networks operating over a Modbus protocol. With a Modbus client running over RS485, data centralisation and regular transfers between it and the various servers on your network are guaranteed for your controller or computer.
Liebert Corp (division of Emerson)Liebert SiteLink-E Communication InterfaceI/O Interface: Liebert SiteLink-E is an Ethernet-ready device that supports all Emerson protocol interfaces as a BACnet router. It provides the communications link between an existing Building Management System and Liebert precision cooling and power and UPS systems. The unit can stand alone or act as a Modbus or BACnet server through either an EIA-232 or EIA-485 (2-wire or 4-wire) configurable port.
LOYTEC electronics GmbHL-INX Controller (LINX-x1x)Controller: L-INX Automation Server (LINX-x1x) is a programmable device (IEC 61131-3 standard) that can be used in any instrumentation or control application. It is also used as a gateway for device types, including Modbus, M-Bus (EN 13757), LonMark, and BACnet. L-INX Automation Servers provide an interface between network technologies and IEC 61131-3 variables.
Masibus Automation And Instrumentation Pvt. Ltd.8-Channel Modbus I/O Module - MAS-AI-U-8-MI/O Module: Masibus is a low-cost 8-Channel Modbus based remote IO unit in DIN rail mounting, which provides an easy way for integrating analog signals to supervisory SCADA/PLC/DAS systems. There are several inputs which this model accepts as an input like mA, V, RTD, Thermocouple, etc. Modbus IO module measures all field signals with accuracy of 0.1% of FS
MessungNexgen 2000 PLCController: Micro-Modular PLC
Micon-Powell Process Systems incMICON U-200Controller: The U-200 combines RCM functionality and reliability with the latest in technological advances including Ethernet and Internet communications, OPC compatibility, and Microsoft ? CE technology. The controller is fully compatible with any DCS or plant control system with OPC and Modbus communications.
Molex, LLCSST-ESR2-CLX-RLLI/O Interface: Connects Allen-Bradley ControlLogix to Modbus and/or Modbus TCP network. Fully integrated into the Rockwell environment, the SST-ESR2-CLX-RLL includes simple-to-use software with AOP. Includes two independent Modbus channels and single Modbus TCP port.
Molex, LLCSST-SR4-CLX-RLLI/O Interface: SST™ communication modules for Rockwell ControlLogix systems connect Allen-Bradley ControlLogix to a Modbus Serial network. Each SR4 module has 4x serial communication channels that act independently and are electrically isolated from each other to perform powerful data exchange with industrial devices such Modbus Clients or Servers.
Molex, LLCSST-ESR2-CPX-S and SST-ESR2-CPX-PI/O Interface: Connects an Allen-Bradley CompactLogix to Modbus and/or Modbus TCP network; Fully integrated into the Rockwell envirionment, the devices include simple-to-use software with AOI (Add-On-Instruction). Two independent Modbus channels and single Modbus TCP port.
Molex, LLCBradControl® Modbus I/O ModulesI/O Module: BradControl® Modbus I/O modules provide a reliable solution for connecting industrial controllers to I/O devices in harsh duty environments. With an IP67-rated housing, BradControl I/O modules can be machine mounted and can withstand areas where liquids, dust or vibration may be present. Advanced network features such as 10/100 Mbps auto-sensing, web server capabilities and a flexible IP address setup method, make configuration and operation simple.
Moore Industries InternationalHART-to-Modbus Converter, HCSI/O Interface: Accepts and "reads" the HART Digital Protocol Signal that rides on the 4-20mA wires of a Smart HART multivariable transmitter or valve; Converts the HART digital signal to serial (RS-485) Modbus RTU communication protocol to allow smart transmitters and valves to interface with Modbus-based systems.
Morningstar CorporationTriStarController: The TriStar is a charge,load,or diversion controller for solar powered systems. It is rated for 45A/60A of charge or load current. An opto-isolated serial DB-9 connector is provided to allow Modbus communication. Via Modbus, the user can adjust setpoints, set coils to perform functions, and log system parameters.
Motor Protection ElectronicsDuplexer ControllerController: The M.P.E. DUPLEXER is a low cost Modbus SCADA-ready pump controller designed to perform level control for duplex lift station applications. The level inputs can be connected to either four float switches or to a conductance probe. The Duplexer provides a 10-second power-up start delay, 5-second lag pump delay, and duplex alternation. LEDs provide power on status, level input status, pump call status, and high level alarm status indication. Pump 1&2 call and high level alarm relays are provided. HOA and lead select toggle switches are also provided. The high level status indication latches upon high level, until reset by pressing the reset push-button (the relay does not stay latched). Level simulation is accomplished by pressing and holding the push-button. Releasing the push-button allows the simulated level to return to normal. Connecting the serial port to a SCADA system allows the lift station to be monitored and controlled remotely. By connecting a programming device to the serial port (MPE p/n TSID), a number of settings may be accessed to customize the unit.
Motor Protection ElectronicsStation Controller SC1000Controller: The M.P.E. SC1000 is a Modbus SCADA-ready pump controller designed to perform level control in a wide range of lift station applications. The SC1000 operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer, or a 10 point conductance probe. The SC1000 alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC1000 has a variety of control options available in the setup menu that may be used to customize the controller for a specific application.
Motor Protection ElectronicsStation Controller SC2000Controller: The M.P.E. SC2000 is a Modbus SCADA-ready pump controller designed to perform level control in a wide range of lift station applications. The SC2000 operates the pumps based on the selected setup values and the wet well level signal. The level input source is menu selectable for either a 4-20 mA pressure transducer or a conductance probe. The SC2000 alternates the pumps, performs lag pump delays, and provides high and low level alarms. The SC2000 has a variety of control options available in the setup menu for customizing the controller for a specific application. Optional I/O is available for VFD speed control and for additional telemetry inputs. The controller can be ordered with up to four additional analog inputs and up to four additional analog outputs.
MRO Stock Company Modicon Quantum Family, 140CPU43412A, 140CPU11303, 140CPU53414BController: Quantum Family CPU modules are used with the Unity software environment. The Quantum family of Programmable Logic Controllers are optimized for process control and high availability needs.
National Instruments CorporationReal-Time Embedded Vision System, EVS-1464RTController: Rugged automation controller that combines industrial camera connectivity with open communication. The NI EVS-1464RT is designed to acquire and process images in real time from multiple IEEE 1394 and GigE Vision cameras for machine vision applications such as high-speed sorting, assembly verification, and packaging inspection. Send commands and data to other devices, such as PLCs and operator interfaces, using Ethernet protocols such as TCP/IP, EtherNet/IP, and Modbus TCP, as well as serial protocols such as RS232 and Modbus serial.
Niobrara Research & Development Corp.Momentum Serial Tophat, MSTI/O Interface: The Momentum Serial Tophat has an RS-485 port. It is used for dropping Momentum I/O onto serial networks without requiring tophat programming. It supports all Momentum I/O bases as well as Square D's Seriplex(r) base and Niobrara's MUCM programmable ASCII base. It is available in several protocols, connectors, baud rates, and parities.
Numag Data Systems Pvt LtdNSPEAK Voice Announcement SystemI/O Module: This is a Voice announcement system with a built in speaker and RS485 interface which has provision to store voice messages in the form of MP3 files, on the device and play the required message under command from MODBUS MASTER . Very useful in the context of generating Voice Alert Messages in any Industrial Automation or Building Automation System. It implements Modbus RTU Protocol on RS485 network.
ObviusModHopper R9120-1I/O Interface: The Modhopper wireless Modbus/pulse transceiver from Obvius provides a self-optimizing wireless interface between multiple Modbus devices and networks, perfect for submetering commercial and industrial facilities. Adding Modbus devices to any network without the need for costly communications wiring. Connects new or existing Modbus and pulse devices (meters, sensors, etc.) without the need for costly wiring runs, core drilling or conduit. Simply connect the Modbus devices to the serial port on the Modhopper and the transceivers will automatically detect the optimum routing to insure reliable and timely data communications. Data from each Modhopper wireless transceiver is passed from one transceiver to another to reach its ultimate destination. This self-managed mesh network means that the system will function with high reliability where other wireless systems fail due to short- or long-term interference with radio signals.
OMEGA Engineering, Inc.Wall/Pipe Mount Temperature/Process Controller, CN3440-C4Controller: Wall/Pipe Mount Temperature/Process Controller for Single Output, Heat/Cool, or Motorized Valve Control.
Omron Electronics LLCE5CN/E5CN-U Digital Temperature ControllerController: Basic Temperature Controller with enhanced functions and performance, including improved indication accuracy and preventive maintenance function.
Open Control SolutionsPump Control Device (T2000)Controller: The Total Control Unit (T2000) is a constant-speed pump controller for Lift Station and Tank with Well Pump applications.
Open Control SolutionsRIO32 I/O DeviceI/O Module: The RIO32 is a an ?open architecture? high-density railmounted I/O device. The RIO32 supports Modbus ASCII, RTU and TCP protocols. This device is used for local and remote monitoring and control over wide-area Radio and Ethernet networks.
Open Control SolutionsRIO128 I/O DeviceI/O Module: The RIO128 is a unique ?open architecture? high density railmounted I/O device. The RIO128 supports Modbus ASCII, RTU and TCP protocols. This device is used for local and remote monitoring and control over wide-area Radio and Ethernet networks.
Open Control SolutionsRDP180 PLCController: The RDP180 is an ?open architecture? rail-mounted PLC equipped with an ARM processor. The RDP180 supports Modbus ASCII, RTU and TCP protocols. The RDP180 features limited onboard I/O for smaller applications. For larger applications, the RDP180 can be used in conjunction with an I/O device, such as the RIO128/RIO032, to provide distributed process automation over wide-area Wireless and Ethernet networks.
Open ControllerOC-8 Series Miniaturized Embedded ControllerController: Embedded controllers for connection of machines, devices and systems in a network for real time communication and interaction. Open Controller meets the need for faster development, reuse of knowledge and sustainable solutions, based on a complete tool chain, source code and examples to accelerate implementation
ORMEC Systems Corp.SMLC-SAController: The SMLC-SA combines ORMEC's drive technology, ORMEC's motion technology and PLC capabilities of the SMLC together with the IEC 61131-3 programming flexibility into a single, compact, cost-effective package.
Partlow brand (Danaher Industrial Controls)MLC 9000+ MODBUS/TCP Bus Communication ModuleController: The Modbus/TCP Bus Communications Module (BCM) is part of the MLC 9000+ DINRail mount PID control system. The BCM handles communication between up to 8 single or multiple loop controller modules and the Modbus/TCP network. Systems larger than 32 loops can be built using multiple BCMs, within the limitations of your Modbus/TCP system.
Pepperl+FuchsIDENTControl CompactController: The IDENTControl Compact family of one- and two-head RFID controller solutions complements the company's family of four-head IDENTControl RFID controllers.
Phoenix Digital CorporationOptical Communication Module for Modbus, Modbus PLUS, Ethernet, and Modicon Remote I/OI/O Module: Redundant, Self-Healing, Multidrop Fiber Optic Connectivity for Modbus, Modbus PLUS, Ethernet, and Modicon Remote I/O communication networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications.
Phoenix Digital CorporationOptical Communication Modules for Modbus, Ethernet, and GE Fanuc Genius and SNP NetworksI/O Module: Redundant, Self-Healing, Multidrop fiber optic connectivity for Modbus, Ethernet, and GE Fanuc Genius, and SNP (Series 90 Protocol) networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications.
Phoenix Digital CorporationOptical Communication Module for Modbus, ControlNet, Ethernet, Fast Ethernet, and Rockwell Data Highway Plus?, Remote I/O, SLC 500? DH-485, DF1, and RS-232/422/485 networks.I/O Module: Redundant, Self-Healing, Multidrop Fiber Optic connectivity for Modbus, ControlNet?, Ethernet, Fast Ethernet, and Rockwell Data Highway Plus?, Remote I/O, SLC 500? DH-485, DF1, and RS-232/422/485 networks. Real-time diagnostics monitor network integrity and locate fault and impending fault conditions on-line, without disrupting network communications.
Precision Digital CorporationPD6088/89 ProVu Super Snooper Modbus ScannersController: The ProVu PD6088/89 Series Super Snoopers are NEMA 4X 1/8 DIN panel indicators with decimal or feet & inches display options. The scanners can be set up as Modbus RTU Clients, Servers, or Snoopers, monitoring multiple Modbus devices for up to 16 process variables.
Procon ElectronicsMOD-MUX Modular I/O SystemI/O Module: MOD-MUX is an innovative modular I/O solution for distributed I/O requirements. The MOD-MUX system consists of stand-alone digital and analog input and output modules connected together on a RS485 two-wire multi-drop network using the Modbus protocol.
Reliable Controls CorporationMACH-ProSys Building Controller, MPS, MPS-HController: The MACH-ProSys(tm) is a powerful 32-bit based BACnet device that delivers value in a high performance building controller. The MACH-ProSys™ provides high speed 10/100 Ethernet, SMART-Net communications, 12 inputs and 8 outputs, and protocol support for BACnet, RCP, and Modbus RTU and TCP (both client and server). The MACHProSys(tm) controller database allows users to define up to 160 universal I/O on a single address. Additional I/O points are added to the MACHProSys™ using MACH-ProPoint™ I/O expansion modules. Up to 7 MACH-ProPoint™ expansion modules can be added to each MACHProSys™ controller.
Reliable Controls CorporationMACH-ProCom Building Controller, MPCController: The MACH-ProCom™ is a 32-bit based BACnet device that delivers unprecedented value in a high performance building controller. The MACH-ProCom™ provides high speed 10/100 Ethernet, SMART-Net communications, expandable I/O, and protocol support for BACnet, RCP, SMTP, and Modbus RTU and TCP (both client and server). The MACHProCom™ controller database allows users to define up to 160 universal I/O on a single address. Points are added to the MACH-ProCom using MACH-ProPoint I/O expansion modules, up to 8 of which can be added to each MACH-ProCom controller.
Renu Electronics Pvt. Ltd.Remote Digital I/O, RDIOI/O Module: DIN rail or panel mounted compact Digital I/O module
Richards Zeta Building Intelligence, Inc.RZ M2 Web-Based ControllerController: Internet Protocol (IP)-centric Intelligent Building solution leveraging existing building assets and infrastructure. An advanced hardware and software package, the Richards-Zeta M2 combines the power and feature sets seen in RZ products such as the Mediator and moZaic. Richards-Zeta?s (RZ) perfectHOST software leverages systems and sub-systems supported by and connected to the M2, including LonWorks, BACnet, Modbus and 40 plus additional drivers, including Johnson N1/N2, BC NW8000, Staefa Smart 1-2, Trane Tracer ?UCM, CSI MR, and others.
RKC Instrument Inc. (Rika Kogyo Co., LTD)FB900/400 ControllerController: The FB Series is a high performance process controller with a more advanced Brilliant II PID, autotuning, advanced tuning, selectable sampling cycle time of 0.05/0.1/0.25 second and 0.1 % of accuracy in short depth housing.
Ross ControlsD-Series Fieldbus Communication and I/O ModulesI/O Interface: Ethernet -(Modbus TCP, DeviceNet) supported Fieldbus Communication and I/O Modules for applications including welding, clamping and packaging
Rotork Controls Ltd.P3 Master StationController: The Rotork P3 Master Station provides a high integrity link from the DCS to the valves in the field. It includes a keypad and color display screen to allow operators and engineers to control and monitor any of the attached valve actuators at any time. Dual Ethernet communication ports are provided capable of serving web pages to a standard PC and/or Modbus TCP communication to a dedicated control system. RS232 and RS485 serial ports are also provided for Modbus RTU communication.
SAMSON AGProgrammable Logic Controller (PLC) TROVIS 5571Controller: PLC designed for heating, ventilation and air-conditioning systems. Modbus master interface for communication with other Modbus instruments (e.g., TROVIS 5576, 5579).
SCADAMETRICSEtherMeter (Model EM-100)I/O Module: A flow meter interface for SCADA, Telemetry, and Building Automation Systems: The EtherMeter is an industrial protocol translator built to work with encoder-type and pulse-type flow meters -- especially water, gas, and petroleum meters. On the automation side, it communicates using Modbus (RTU/ASCII/TCP), DF1, and EtherNet/IP. On the meter side, it is compatible with water, natural gas, and petroleum meters from Sensus, Neptune, Badger, Itron, Elster-AMCO, Kent, ABB, Hersey, Master Meter, Siemens, plus most pulse-based meters. When the EtherMeter is used with AMR protocol-enabled meters, it eliminates the totalization errors that can plague pulse-based meter-reading techniques. Target applications include water plants, pumping stations, master meter stations, automated buildings, and commercial sub-metering.
Sealevel Systems, Inc.Relio R9 ARM9 Embedded RISC ComputerController: Relio R9 is an application-ready platform for your next product design. The system is based on the 200MIPS Atmel AT91SAM9263 microcontroller boasting a 32-bit ARM instruction set for maximum performance.
Sealevel Systems, Inc.Data Acquisition Modules, SeaI/O-530 & SeaI/O-540I/O Module: The SeaI/O-530 and SeaI/O-540 digital I/O modules offer a powerful selection of open-collector outputs and optically isolated inputs.
Sealevel Systems, Inc.eI/O Ethernet & PoE Digital I/O ModulesI/O Module: eI/O Ethernet digital I/O modules are cost-effective and allow remote monitoring of digital I/O from anywhere on your 10/100BaseT Ethernet network. I/O options include optically isolated inputs, Reed and Form C relays.
Sealevel Systems, Inc.SeaI/O-570I/O Module: The SeaI/O-570 features eight single-ended 16-bit analog inputs, eight optically isolated digital inputs and eight Form C relay outputs. Connect to a host devices via Wireless (802.11b/g), Ethernet (Modbus TCP), USB or RS-232. Communicate using industry standard Modbus RTU or Modbus TCP protocols or use the Sealevel SeaMAX software libraries from your application program. The SeaI/O-570 module is powered from your 9-30VDC source, or select from a variety of power supply options. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
Sealevel Systems, Inc.SeaI/O-580I/O Module: SeaI/O-580 modules feature 32 optically isolated, dry contact inputs that are controlled and monitored via any 10/100 BaseT Ethernet connection. Communicate with SeaI/O modules using industry standard Modbus protocol or use the Sealevel SeaMAX API software libraries from your application program. The SeaI/O-580E is powered from you 9-30VDC source, or select from a variety of power supply options. The SeaI/O-580PoE is a Class 0 (IEEE 802.3af-2003) Power over Ethernet device; power and data are transferred over a single CAT5 cable. Up to 246 additional expansion modules can be added using convenient pass-through connectors.
Sentry Equipment CorpAutomatic Sampler Controller, Model SBCController: Standalone controller specifically designed for use with Sentry samplers
Siemens Energy & Automation, Inc.Model 353 Process ControllerController: The 353 is a stand-alone, panel-mounted, industrial controller that can serve as a simple single loop or as a multi-loop with complete continuous and ladder logic capability for small unit batch or continuous process. The controller includes a variety of built-in I/O, I/O can be extended using remote Ethernet Modbus TCP modules.
Siemens Energy & Automation, Inc.Model 353R (iPac) Process ControllerController: The 353R (iPac) is a stand-alone, rack-mounted, industrial controller used in a broad range of process control applications. It serves as a multi-loop with complete continuous and ladder logic control capability for a small unit batch or continuous process. It can be furnished with up to 32 plug and play I/O modules to handle complete I/O requirements. It can be networked using Modbus RS485 or Modbus TCP. Part of the controller family includes HMI software that comes with Modbus RTU and Modbus TCP OPC servers that automatically generates the controller database, based on the controller configuration, for simple connection to the controller.
SIMEX Sp. z o.o.MultiCon CMC-141Controller: Multicon CMC products are versatile, compact multichannel-controllers with a capability to record data. MultiCon CMC?141 integrates advanced control functions (PID, ON/OFF, time & profiles etc.) and logging of setpoints, excitations and current state of controlled objects.
Sixnet, LLCSixTRAK IPm(tm) ControllerController: The SixTRAK IPm(tm) is the ultimate process controller with the power of open LINUX software. Its powerful communications and advanced programming capabilities make it the perfect solution for your process control, SCADA, or DCS application. Though it is built-on the open LINUX operating system, no knowledge of LINUX is required in most applications. Get all the benefits of open LINUX with no extra effort. The SixTRAK IPm(tm) is 100% compatible with SIXNET's legacy SixTRAK Gateways. All existing ISaGRAF user programs will load and run in an IPm(tm) without any changes.
Sixnet, LLCSixTRAK I/O ControllerController: The SixTRAK I/O Controller (ST-GT-1210) can run an ISaGRAF IEC 61131-3 program, perform datalogging, and interface to thousands of I/O, all in real-time. Select this unit when you need a reliable way to control or monitor Ethernet, RS485, or local I/O, and then connect to a supervisory computer. It is perfectly suited for most control and data acquisition applications where some PLC-style programming is required. (This one I/O controller replaces most of SIXNET's legacy programmable SixTRAK I/O gateways).
Sixnet, LLCEtherTRAK I/O ConcentratorI/O Interface: The EtherTRAK I/O Concentrator (ET-GT-ST-2) is a universal interface for your SIXNET and Modbus I/O. It provides transparent bridges between your Ethernet, RS232 or RS485 communications. It can poll your I/O modules or Modbus devices over one communication link and then make the data available over another.
Sixnet, LLCEtherTRAK Ethernet I/O ModulesI/O Module: EtherTRAK Ethernet I/O is a convenient and economical way to bring real-time Ethernet networking to the plant floor. EtherTRAK I/O provides "process quality" and "DCS-like" features in a compact industrially hardened package.
Sixnet, LLCRemoteTRAK RS485 I/O ModulesI/O Module: RemoteTRAK I/O is ideal for high performance communications over long distances. Modules link together with a single pair of wires at distances up to two miles using standard RS485 communications. This advanced "Process Quality" I/O offers the high-end performance of a DCS system in a compact, affordable, open modular package.
Smar UK LtdModbus RS232 / RS485 InterfaceI/O Interface: This device is a Modbus RS232 / RS485 Interface enabling Modbus RS232 devices to operate in a Modbus RS485 multi-drop environment.
SoftPLC CorporationSmart Adapter, SMA11-xI/O Interface: Smart Adapters provide a Modbus TCP/UDP remote I/O interface to SoftPLC's Tealware I/O, which can be used with a SoftPLC controller or any other controller that can drive ModbusTCP I/O.
Spinwave Systems, Inc.Wireless Thermostat Controller, SWC-TSTAT-1Controller: Spinwave Systems' Wireless Thermostat Controller is a drop-in replacement for almost any existing conventional non-communicating thermostat, re-using the existing equipment wiring. Thermostat functions and values are accessible remotely through an embedded web page of the Modbus Mesh Gateway or via Modbus communication. The wireless thermostat controller is a full function wireless mesh device with integrated radio that can be configured to control heat pump systems, (with auxiliary or emergency heating if necessary), gas/oil heating systems with add on cooling, control high and low balance points as well as the number of heating and cooling stages needing precise control. It can even adapt to manage the number of fan speeds it must control.
Spinwave Systems, Inc.Wireless I/O Module, SWIO-2AI-2ROI/O Module: Spinwave Systems' wireless I/O Module is a full function wireless mesh device that provides 2 Inputs and 2 Outputs and repeats/routes the RF signal from other wireless nodes, e.g. zone sensors. Inputs can be configured for contact closure, thermistor or pulse counting (metering applications). The I/O Module features an on-board 24VAC power supply. The wireless I/O module is connected through Spinwave's wireless gateway (Modbus RTU, Modbus TCP) to the automation system.
Spinwave Systems, Inc.Wireless I/O Module, SWIO-8AI-8AOI/O Interface: Spinwave Systems' Wireless I/O Module includes an external radio module with integrated antenna. The wireless I/O Module is a full-function wireless mesh device that provides 8 Inputs and 8 Outputs and repeats/routes the RF signal from other wireless nodes, e.g., zone sensors. Inputs can be configured for contact closure, voltage (0-5VDC) or current (0-20mA).The wireless I/O module is connected through Spinwave's wireless gateway (Modbus RTU, Modbus TCP) to the Automation System.
Spinwave Systems, Inc.Wireless I/O Module, SWIO-8AI-13ROI/O Module: Spinwave Systems' Wireless I/O Module includes an external radio module with integrated antenna. The wireless I/O Module is a full function wireless mesh device that provides 8 Analog Inputs and 13 Relay Outputs and repeats/routes the RF signal from other wireless nodes, e.g. zone sensors. Inputs can be configured for contact closure, voltage (0-5VDC) or current (0-20mA). The wireless I/O module is connected through Spinwave's wireless gateway (Modbus RTU, Modbus TCP) to the Automation System.
SPLat Controls Pty Ltd.CC18 ControllerController: Board-level programmable controller that provides 16 digital I/O points in any combination of inputs or outputs, as well as two analogue inputs for modern ratiometric sensors. The CC18 controller comes in a bare-board format designed for integrating into a product as a component part.
StoneL CorporationInput/Relay Output ModulesI/O Module: This I/O module is designed to function as a Modbus (RS485) node with termination points for connecting switches/sensors as well as relay outputs to operate devices such as motors.
SUNIX NCCI Co., Ltd.SUNIX ioSCADA SM seriesI/O Module: Series of industrial Modbus I/O supporting Modbus RTU & ASCII.
taskit GmbHgpio.AI model 544202I/O Interface: The gpio.AI modules provide eight analogue inputs designed to measure both voltage and current. They easily integrate into existing Modbus systems. An individual serial number allows identification and configuration even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family.
taskit GmbHgpio.AO model 544206I/O Interface: The gpio.AO modules extend the gpio.NET Core interface by four analogue outputs and one frequency generator. They easily integrate into existing Modbus systems. An individual serial number allows identification and configuration even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family.
taskit GmbHgpio.DIO model 544210I/O Interface: The gpio.DIO modules extend the gpio.NET Core interface by numerous features to capture, generate and process opto-decoupled digital signals. For example, functions such as PWM or frequency counters. They offer the possibility of creating customisable I/O configurations, to meet your application's specific needs. The modules easily integrate into existing Modbus systems. An individual serial number allows you to identify and configure them even during operation. Furthermore, they offer an uniform register set covering the hole gpio.NET family.
taskit GmbHgpio.Relais model 544214I/O Interface: The gpio.Relais modules offer access to four relays as well as four digital inputs. They extend the gpio.NET Core interface by features to measure and process opto-decoupled signals. The modules easily integrate into existing Modbus systems. An individual serial number allows you to identify and configure them even while operational. Furthermore, they offer an uniform register set covering the whole gpio.NET family.
Techno Trade SAEthernet Remote I/O ModulesI/O Module: The RM modules connect a wide variety of electrical, electronic, and mechanical devices and sensors - such as pumps, temperature and pressure transmitters, motors and more - to computers and applications over standard Ethernet networks (Modbus TCP) or RS485 (Modbus RTU) or even to other controllers and PLCs.
Temco Controls Ltd.T3 Series I/O ModulesI/O Module: The T3 Series Modules are general purpose Input/Output modules for building integrators. Available in several Input/Output configurations, the T3 Series Module provides convenient termination for .eld devices and interfacing to HVAC, lighting, temperature sensors, and other typical building automation applications.
Temco Controls Ltd.T3-NC Network ControllerController: The T3-NC Network Controller is an Ethernet-to-Modbus gateway that can also manage occupied schedules of a Tstat5 network. It can support up to 254 TSTATs. This device uses Modbus communication and is easily installed within existing systems. It includes a real-time clock/calendar and a large memory space that allows customized scheduling.
TeplocomHeat Quantity Calculator, BKT-7, BKT-7M, BKT-9Controller: These calculators are used in heat meters and measuring systems, designed to measure the parameters of the thermal fluid (flow, volume, temperatures, pressures), quantities of heat (heat energy) and coolant in water heat consumption systems as well as for measuring the number of others of the measured media.
Texas Instruments (Sensors and Controls)DiagnosTECH? Integrated Furnace ControlController: DiagnosTECH? is an integrated furnace ignition control board with diagnostic and monitoring capabilities. The control monitors the flame current, thermal limit, pressure switch and thermostat inputs in order to insure safe operation, while also logging any error code history with a relative time stamp.
Tolomatic, Inc.Axiom PV Brushless Servo Controller/DriveController: The Axiom? PV sequential motion controller features an integrated PLC, motion controller and drive. Windows?-based software uses a point-and-click sequential program and PLC ladder logic editor.
TOPSCCC GmbHInternet Embedded Controller EX9188END-MTCP SeriesController: Internet Embedded controller with Modbus to TCP/IP gateway
Triangle Research International, Inc.M-series PLCsController: Internet-programmable embedded PLCs for OEM applications
Triangle Research International, Inc.Nano-10 Super PLCController: The Nano-10 is a full-function PLC measuring only 3.3" by 2.8" and weighing 2.6 oz. It has a built-in Ethernet port which supports Modbus TCP Server and Client connections.
Triangle Research International, Inc.FMD88-10 Embedded PLCController: The FMD88-10 is designed with ready connectivity to many peripheral device types. With the built-in Ethernet port and the iTRiLOGI client/server software, the FMD88-10 is fully accessible for machine monitoring and OEM troubleshooting/reprogramming over the Internet. Built-in RS232 and RS485 connections and Modbus support make the FMD88-10 easy to integrate into mixed-brand PLC environments and networks.
Trio Motion TechnologyMC464 Multi-axis Motion and Machine ControllerController: MC464 multi-axis motion and machine controller module with I/O, status display, SD card memory expansion, axis synchronisation and programming ports.
Trolex LtdTX9042/9044 Programmable Sensor ControllerController: Sensor controller with up to eight channels for any choice of analogue sensor or digital input, including gas detectors, flow sensors, pressure sensors and vibration sensors; temperature devices; frequency inputs and digital sensors.
Trolex LtdCommanderI/O Interface: The Commander central processor controls up to 960 I/O field devices and RS485 MODBUS communications for SCADA systems. Plug-in intelligent I/O channel cards can be configured in any required combination to suit the system topology.
TSI IncorporatedSUREFLOW room ControlsController: SUREFLOW? room controls are designed to maintain room balance in Variable Air Volume laboratories by ensuring that the exhaust is greater than or less than the supply by a set volume. SUREFLOW controls also directly control heating and cooling in the space to maintain a comfortable temperature.
TURCK Inc.piconet® IP-link Coupling Modules and ExtensionsI/O Interface: The busstop® coupling modules SxxL-0404D-000x are designed for direct connection of four binary inputs and four binary actuators to the higher level fieldbus Up to 255 extension modules can be connected via the IP link interface.
United Electronic Industries, Inc.UEIModbus Cube & Rack SystemsController: The UEIModbus cubes are compact, rugged, Ethernet-based data acquisition and control interfaces that communicate with a host computer or PLC over Modbus TCP. The wide variety of I/O UEI offers allows you to configure one or more cubes or racks to match the specific I/O requirements of your application. The UEIModbus chassis family is ideally suited for a wide variety of industrial monitoring and control applications. The UEIModbus functions as a Modbus server that is easily accessed by any software client acting as a Modbus Client. Most popular HMI software supports the Modbus protocol. Each UEIModbus system Mod UPG allows the UEIModbus to run as a Modbus TCP node.
UnitronicsUnitronics M90/M91 OPLCController: The M90/M91 OPLC is a micro-PLC with a built-in operating panel that contains an LCD display screen and full numeric keypad for easy man-machine communication. The M90/M91 offers a variety of expandable onboard I/O configurations, a two 16-character-text-line LCD and keypad (one line in the M90 models). 12 convenient models make the M90/M91 appropriate for water treatment, alarm systems, traffic signal control, automated production, process control (thermal, level, pressure), and many more. The M91 uses Modbus to create a multi-device network, and establish client/server communication between M91 OPLC? units and any connected device that supports Modbus.
UnitronicsVision120Controller: The Vision120 supports up to 128 I/Os, and has two RS232/RS485 COM ports. The Vision120 Ladder software offers up to 448K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include CDMA/GSM, Remote Access utilities, Modbus, CANbus and OPC server.
UnitronicsVision230 Controller: The Vision230 is a high-performance PLC with an integral graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus.
UnitronicsVision260 Controller: The Vision260 is a high-performance PLC with an integral graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus.
UnitronicsVision280 Controller: The Vision280 is a high-performance PLC with an integral touchscreen graphical operator panel and keyboard. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus.
UnitronicsVision290Controller: The Vision290 is a high-performance PLC with an integral touchscreen graphical operator panel. The PLC can handle up to 171 I/Os via Snap-in and Expansion modules. The Ladder software offers up to 1000K of application memory and supports auto-tune multiple PID loops and Data Tables. Communication options include TCP/IP Ethernet, GPRS/CDMA/GSM, Remote Access utilities, Modbus and CANbus.
UnitronicsVision350Controller: Palm-size PLC with diverse I/O options. Its 3.5? TFT touchscreen can show over 1000 displays, with 3.5 MB for images and fonts. The Vision350 supports up to 512 I/Os via on-board and I/O expansion modules.
vMonitor, Inc.vMBusX-P Ethernet-Enabled MicroPLCController: vMBusX-P is a MicroPLC based on open standards and packed with a wealth of features. Combined with vMonitor?s wireless technology, the unit offers open system design with limitless multi-user connectivity. Designed for use in harsh environments and low power applications, these units are easy to install and maintain and operate under extreme environmental conditions.
Watlow Electric Manufacturing CompanySeries SD PID Temperature ControllersController: The Series SD family of PID temperature controllers are programmable PID, high/low limit controllers using advanced technology. Suited for a broad range of applications in temperature and process control.
Watlow Electric Manufacturing CompanySeries 998/999 Process ControllersController: The Watlow Series 998 vertical 1/8 DIN two-channel process controller and the horizontal 1/8 DIN SERIES 999 offer two channels of PID control in a single package. With up to six ouputs, the controller is designed to handle most applications where multiple processes need to be controlled.
Watlow Electric Manufacturing CompanySeries 988/989 Temperature/Process ControllersController: Watlow's Series 988 (vertical) and SERIES 989 (horizontal) temperature/process controllers are designed and manufactured for the demanding requirements of the industrial controller market.
Watlow Electric Manufacturing CompanySeries F4 Ramping ControllersController: Watlow's Series F4 ? DIN industrial ramping controllers offer an easy-to-set-up-and-operate solution for the most demanding ramp and soak and processing applications. The features and performance of these units make them ideally suited for environmental chamber or furnace and oven applications.
Watlow Electric Manufacturing CompanySeries 96 ControllerController: Watlow's Series 96 is a powerful 1/16 DIN dual-display controller that offers many advanced functions. This controller can be tailored to perform hardware and software needs with hardware modules that are pluggable and exchangeable, and software menus that may be user programmed to fit exact application requirements.
Watlow Electric Manufacturing CompanySeries 97 ControllerController: Watlow's Series 97 is a micro-processor-based controller with a single input, second auxiliary input and four outputs. The controller is versatile in handling applications that require a high/low limit, alarms, retransmit and communications.
Watlow Electric Manufacturing CompanySeries 981/982 Ramping ControllersController: The Watlow Series 981 (horizontal) and 982 (vertical) are 1/8 DIN time/temperature profile controllers. They are designed with most typical programming needs in mind.
Watlow Electric Manufacturing CompanySeries CLS200 Multi-Loop ControllerController: The Watlow Series CLS200 controllers combine performance and flexibility with compact design. The four, eight and 16 loop versions provide complete control solutions for a broad range of applications. Each controller includes built-in serial communications. Optional features include programmable ramp-and-soak profiling, cascade control and process variable retransmit. The SERIES CLS200 controllers are UL? and C-UL? listed and carry the CE mark.
Watlow Electric Manufacturing CompanySeries MLS300 Multi-Loop ControllerController: The Watlow Series MLS300 controllers combine performance and flexibility with compact design. The 16 and 32 loop versions provide complete control solutions for a broad range of applications. Each controller includes built-in serial communications. Optional features include programmable ramp-and-soak profiling, cascade control and process variable retransmit. The SERIES MLS300 controllers are UL? and C-UL? listed and carry the CE mark.
Watlow Electric Manufacturing CompanyEZ-ZONE PM Panel Mount Temperature ControllerController: The EZ-ZONE PM panel mount controller offers options to reduce system complexity and the cost of thermal loop ownership. You can order the EZ-ZONE PM as a PID controller, an over/under limit controller or these functions can be combined into an integrated controller.
Watlow Electric Manufacturing CompanyEZ-ZONE RM Rail Mount ControllerController: The EZ-ZONE RM rail mount controller integrates multiple controller functions saving time, space and cost. The EZ-ZONE RM can be used as a PID temperature/process controller, an over/under limit controller or can combine these functions into an integrated controller.
Watlow Electric Manufacturing CompanyEZ-ZONE ST Integrated ControllerController: The EZ-ZONE ST integrated control loop solid state controller offers complete thermal system control in a single package solution. The EZ-ZONE ST offers a PID temperature controller connected to a high amperage solid state relay with the option of adding a properly sized heat sink, over/under temperature limit, shut-down power contactor, digital communications and remote user interface in one package.
Watlow Electric Manufacturing CompanyEHG SL10 Process Controller and Safety LimitController: The EHG SL10 process controller and safety limit integrates a heater, adjustable set point controller, high/low temperature alert, power switching device and a safety high temperature limit all in one package. This base unit controller also offers three upgrade modules: display module, communication module and display and communication module allowing you to purchase only what is required for your application.
Westlock Controls CorporationIntellis 7500I/O Interface: The Westlock Modbus Intellis I/O module, the MPAC, uses the Modbus RTU protocol to communicate serially with a DCS or PLC via the Westlock NIM (Network Interface Manager). The Modbus protocol establishes a common format for the layout and contents of all message fields. Operating commands, sent via Modbus, communicate through the NIM gateway to up to 1000 control valves connected, on a common data highway.
Wizcon Systems (ELUTIONS Europe)GRX Wireless Modem-ControllerController: The GRX wireless modem-controller is a GPS-enabled wireless application platform for encrypted routing, device connectivity and remote control
Zetron, Inc.Model 1730 ControllerController: Advanced Controller for Larger SCADA Systems