Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The CIM/CIU 250 is a standard interface for data transmission over a GSM/GPRS network between a Modbus master and a Grundfos pump or controller. It makes remote data exchange possible between Grundfos pumping systems and a PLC or SCADA system. It can be used as an SMS interface to control and monitor a Grundfos product from a mobile phone. It is possible to get a message whenever a warning or an alarm occurs, to request the status or to do simple control like START, STOP and adjusting of setpoint. The interface module can be installed as an internal add-on or as a wall-mounted unit (for products where internal connections are not supported).
Supports a wide range of Grundfos products; Simple configuration of the hardware via SMS messages; Modular design; Prepared for future needs; 24-240 VAC/VDC power supply in CIU; Modbus diagnostics available
Supply voltage: 24-240 VAC/VDC, -10%/+ 15%; Frequency: 0 - 60 Hz; Power consumption: Max. 11 W; Enclosure class: IP 54, according to IEC 60529; Cable entry: 6 x M16 Ø4 - Ø10; Operating temperatures: -20 °C to +45 °C (-4 °F to +113 °F); Storage temperatures: -20°C to +60°C (-4°F to +140°F); Dimensions: (H/W/D) 182 x 108 x 82 mm
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor