Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
This gateway works well for field applications where it can be installed closer to the HART instrument, saving on copper cable and installation costs. The gateway also saves valuable rack space for other in-chassis options. The gateways provide fast channel update times (all channels updating simultaneously in 67 ms) making the HART Analog Input Gateway ideal for applications where high speeds and point-to-point connectivity are required. These gateways are available in 4 and 8 Analog input channel options.
Used to interface many different protocols with the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol; Supports both Client and Server connections; The HART Analog Protocol exists in 4 and 8 channel implementations; Driver can be configured on an individual channel basis to operate as a HART Master Station and supports all the available HART commands including Universal, Common Practice and Device Specific Commands; Each HART channel independently configured to interface with the internal database in the module.
Power Supply 24 VDC nominal 18 to 32 VDC allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade; Current Load 500 mA max @ 32 VDC max; Operating Temperature -4°F to 122°F (-20°C to 50°C); Storage Temperature -40°F to 185°F (-40°C to 85°C); LED Indicators; Configuration Serial Port DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only) 10Base-T half duplex RJ45 ConnectorLink and Activity LED indicators; Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor