Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The X-gateway acts as translator between a Modbus-TCP network and a CANopen network. The primary focus is the fast transfer of cyclic I/O data between the networks. It provides Modbus-TCP Client (Master) functionality to the (downlink) Modbus-TCP network and acts as a CANopen Slave on the control (uplink) network.
Allows integration of PLC systems with Modbus TCP into other PLC systems with CANopen; Provides a fast transfer of I/O data between networks, typically no more than 5 ms delay; Integrated 2-port Ethernet switch allows for daisy-chaining and can reduce infrastructure costs; Web based network configuration gets you up and running fast. No programming required; SD memory card slot allows for backup, configuration and easy module replacement; Live list to inform the uplink PLC the status of connected Modbus-TCP server devices
Up to 64 server connections and transactions; Up to 256 bytes Input and 256 bytes Output data or 32 RPDO's input and 32 TPDO's Output (CANopen); Modbus TCP baud rate of 10 Mbps and 100 Mbps; CANopen auto baud rate detection; 24VDC Power supply with typical 150 mA current consumption; Temp: -25 to +70 c; Size: 110 x 35 x 101 mm; CE, UL, ATEX certified
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor