Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
Stand-alone DIN-rail mounted modules that provide one Ethernet port for communication, allowing for remote configuration and diagnostics. The PLX30 gateways also come with an SD Card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways also come with a wide input power range (10 Vdc to 36 Vdc), and an extended temp range (-25°C to 70°C ). Includes all necessary cables required for communication.
4000 Word database; Multiple I/O Connections; Status data; Node Health; 10/100 Mb Ethernet port with Auto Cable Crossover Detection; Data Analyzer for Modbus Serial Network
Power Supply: 24 Vdc nominal, 10Vdc to 36 Vdc allowed, Positive, Negative, GND Terminals; Current Load: 24 Vdc nominal @ 300mA, 10 to 36 Vdc @ 610mA maximum; Operating Temp -25°C to 70°C (-13°F to 158°F ); Storage Temp -40°C to 80°C (-40°F to 176°F ); LED Indicators; Ethernet Port 10/100 Base-T half-duplex RJ45; Connector Electrical Isolation: 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991; Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Serial Port(s) Note: The number of serial communication ports depends on the gateway type, and the combination of protocols
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor