Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
This module comes with an Add-on Profile and an Add-on Instruction to reduce commissioning time. The MVI69E-MBS has two serial ports and supports both Master and Slave connectivity to interface with a variety of devices using the Modbus Protocol.
Supports CompactLogix processors with 1769 I/O bus capability version 16 and greater (MicroLogix 1500 not supported); Add-on Instruction creates UDTs, providing logical definitions for I/O, status, and control data; Add-on Profile support for RSLogix 5000, improving integration in the CompactLogix system; Diagnostic data available in RSLogix 5000 controller tags, allowing decisions to be made based upon node health; Module configuration backed up in CompactLogix project (ACD file); Module acts as a co-processor reducing impact to PLC scan time; Supports up to 10,000 words of data; Supports up to 250 Modbus Commands per port; Each port can be configured individually as a Modbus Master or Modbus Slave device; Supports Enron and Daniel-style Floating point data implementations; Suitable for SCADA and field device interface applications
ProSoft Configuration Builder ; I/O Size 60/120/240 - 16 bit integers; Baud Rate: 110 to 115K baud; Stop Bits: 1 or 2 ; Data Size: 7 or 8 bits; Parity: None, Even, Odd
RTS Timing delays: 0 to 65535 milliseconds; Modbus Modes RTU mode (binary) with CRC-16 , ASCII mode with LRC error checking
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor