The 5202-MNET-ASCII4 stand-alone DIN-rail mounted gateway provides one Ethernet port and up to four ASCII configurable serial ports. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors and other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface also. The ASCII protocol driver permits the module to interface to many ASCII devices. Each ASCII port on the module is configurable to send and/or receive ASCII strings, each supporting its own individual serial network.
The MNET-ASCII modules are an ideal solution for the many applications where Modbus TCP connectivity can be used to integrate ASCII generic serial input devices into a system; In combination with the ASCII device support, the module provides a powerful interface to the many ASCII input devices in use in the industrial market today; Applications found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing
Power Supply: 24 VDC, nominal 18 to 32 VDC allowed, Positive, Negative, GND; Current Load: 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators;Configuration Serial Port DB-9M RS-232 onlyNo hardware handshaking;Ethernet Port (Ethernet modules only)10Base-T half duplex RJ45 ConnectorLink and Activity LED indicators Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration;Application Ports Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors;Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation