The MNET-DFCM(4) DIN-rail mounted protocol gateways provide one Ethernet port and up to four serial ports. The Modbus TCP protocol driver can interface many different protocols into Schneider Electric Quantum processors and other devices supporting the protocol. Supports both Client and Server connections, and when coupled with the Web option provides a web/ftp interface also. The DF1 protocol driver supports Master or Slave implementations of the protocol on each DF1 port. All DF1 ports are individually configurable.
The MNET-DFCM modules are an ideal solution for the many applications where Modbus TCP can be used to integrate DF1 devices into a system; Enables easy connection to other Modbus TCP devices (Modicon processors and many others); In combination with the DF1 Master/Slave device support, the module provides a powerful interface to the many DF1 devices; Applications found in most industries, especially Manufacturing, Oil and Gas, Electrical Power and Food Processing
Power Supply: 24 VDC nominal, 18 to 32 VDC allowed, Positive, Negative, GND; Current Load: 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators; Configuration Serial Port: DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only): 10Base-T half duplex RJ45; ConnectorLink and Activity LED indicators; Electrical Isolation: 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991; Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports: Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation: 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation