Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
Peak Demand Automation's 900 MHz multipoint data radio comes pre-configured with no mesh configuration required and 16 times the coverage of ZIGbee transmission without Wi-Fi interference.
Connects RS-485 devices wirelessly where wiring is costly or inconvenient; Diagnostic LEDs for both signal wire and radio performance; 16 non-overlapping channels; 12 channels; 65,000 network codes
Diagnostic LEDs for link debugging; Two versions, wire antenna and long-range antenna; Frequency Band: 902 to 928 MHz; RF Data Rate: 200 kbps, 105 kbps throughput with packet overhead; Indoor/Urban Range: up to 1000 ft (305 m); Line-Of-Sight Range: Up to 4 miles (6 km) w/ dipole antenna; Data Interface: EIA-485 (RS-485), 19.2 kbaud standard, Modbus RTU compatible; Spread Spectrum: FHSS; Dimensions: 3.3" x 1.6" x 0.8" (83 x 42 x 21 mm) (body only)
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor