Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The RIO-10 Multi-IO board provides an easy way to collect analog and digital signal information and in many instances can completely eliminate the need for an RTU at remote points. All I/O has transient and over voltage protection.
4 channels of 12 bit A to D loadable from holding registers 40001-40004; supply voltage monitor loadable from holding register 40005; 2 channels of 4-20mA analog output settable from holding registers 40012 and 40013; 2 channels of isolated digital inputs read as coil 0 and 1 (1xxxx); 2 channels of open collector output written as coil 4 and 5 (0xxxx); 2 input channels with pre-settable 16 bit pulse counters for AMR applications; slave address settable from 1-127 using on-board DIP switch; on-board LED indicators show status, poll, response and I/O state; RTU interface protocol.
See attached spec. sheet.
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor