Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The DL2000-CMX provides an AC powered, freestanding Modbus serial interface for computers, MMIs, and OEM based applications that require access to a node on AB's DH+ network. The CMX can be set to be either a Master or a Slave on the Modbus serial link, as well as communicate using either RTU or ASCII protocols. The CMX in Master Mode can read from and write to registers and coils in any Modbus Slave device connected. Slave Mode allows a Modbus Master device to read from or write to files in a A-B PLC5 or SLC 5/04 connected to the DH+ network.
DH+: Speeds: 57.6 K and 115.2 Kbaud; Modbus: Interfacing using RS232C, RS422, & RS485 with speeds upto 115.2 Kbaud; Modbus: Both RTU and ASCII protocols supported; Modbus: Either a Master or Slave; Configuration:Using menu driven Windows (95/98/ME/NT) based Program via RS-232 Cable; Pushbuttons: Configuration to setup online parameters, Reset for a Hardware Reset; Parameters: Stored in Non-Volitile EEPROM; FLASH: firmware allows ease of upgrading.
CHANNEL Leds: Green Led indicators for IN and OUT channel activity; ERROR Led: Red Led indicator for Serial and Network Errors; POWER Led: Green Led indicates power on; Dimensions: 1.5" H x 7.5" D x 5.5" W (38.0 x 190.0 x 140.0 mm) - Weight 2.2 Lbs (1 Kg); Installation: Metal Enclosure, Footpads; Operating Environment: 32 to 122 ?F (0 to 50 ?C); Storage: -40 to 185?F (-40 to 85?C); Humidity: 5% to 95% non-condensing; Power: 110V/50-60Hz AC (220V and 10-35VDC available upon Request) - 5 Watts.
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor