Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The ProLinx® Modbus TCP to IEC 61850 gateway enables communication between the Intelligent Electronic Devices (IEDs) on an IEC-61850 network and Programmable Logic Controllers (PLCs) or Programmable Automation Controllers (PACs) on a Modbus TCP network.
Configuration Utility integrates tightly with Unity Pro; Application-specific Variable and Function Block files are automatically generated; Users not required to develop communication logic or tag structures in PLC or PAC projects; Configuration files stored on an industrial SD card, allowing for rapid disaster recovery by moving the SD card from a failed gateway to a replacement gateway. Extensive diagnostics for the gateway and for both Modbus TCP and IEC 61850 networks are available via the configuration utility; All IED data attributes are available for mapping to Modbus registers; Modbus TCP Client/Server support enables multiple Modbus TCP devices or SCADA devices to interface with IEC 61850 devices simultaneously
Two Ethernet ports for Modbus TCP and IEC 61850 communication; ProSoft 61850 Configuration Manager for configuration and diagnostic viewing; ProSoft 61850 Tag Monitor for viewing live tag data; ProSoft Discovery Service for setting temporary IP address; Configuration settings saved on a removable 1GB Industrial SD Card; ProSoft 61850 Configuration Manager saves configuration information to an offline file.
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor