Stand-alone DIN-rail mounted protocol gateway provides one Ethernet port and up to four serial ports. The EtherNet/IP protocol driver supports the Explicit Messaging implementation of the protocol. User-configurable as both a Client and a Server, the EtherNet/IP port is a powerful data transfer tool. The Modbus protocol driver supports Master and Slave implementations. Modbus serial ports are individually configurable, providing a powerful and flexible host or device interface solution.
Ideal solution for many applications where EtherNet/IP connectivity can be used to integrate Modbus serial devices into a system; Both Client and Server support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices); In combination with the Modbus device support, the module provides a powerful interface to the many Modbus devices in use today; Used in Manufacturing, Oil and Gas, Electrical Power and Food Processing; EtherNet/IP (Explicit Messaging)
Power Supply 24 VDC nominal 18 to 32 VDC allowed Positive, Negative, GND Terminals 2.5 mm screwdriver blade; Current Load 500 mA max @ 32 VDC max; Operating Temperature -4° F to 122° F (-20° C to 50° C); Storage Temperature -40° F to 185° F (-40° C to 85° C);LED Indicators; Configuration Serial Port DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only)10Base-T half duplex RJ45 ConnectorLink and Activity LED indicators Electrical Isolation 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports Modbus Plus Connector Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation