Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
Software - HMI
The ISEE-MODBUS data acquisition program is a fully featured minimum cost HMI program for controlling and monitoring controllers, PLCs and instrumentation that use the Modbus protocol. Running under Windows XP/2000/NT/ME/98 it allows the user to interrogate multiple controllers, PLCs and instruments.
Supports Modbus RTU and Modbus ASCII modes of; View the holding and input registers as raw readings or in engineering units; Holding and Input registers can contain integers, long integers and floating point numbers; View the status of the coils and input status; Write to the coils and holding registers; Supports up to 256 tags; No graphics to draw. Simply display the readings on the screens. Readings can be grouped as you like; Display registers, coils, statuses and calculated variables on graphs or trends; View the maximum and minimum values for each tag; Log registers, coils, statuses and calculated variables to a csv type file; Display and analyse Historical logged files on graphs; Display and control alarms; Has a control language consisting of If-Then-Else statements allowing calculations and control to be done; The program configuration can be saved to disk; All analog, digital inputs and outputs and calculated variables are defined by tags with real names and real engineering units making it easy for you to understand what is going on.
For more information, see http://www.oceancontrols.com.au/modbus/isee_modbus.htm.
Copyright © 2005-2013 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor