Control Microsystems SCADAPack PLC series includes five models. The SCADAPack is a flexible controller with integrated power supply, analog and digital I/O and serial communications. The product uses Modbus RTU, Modbus ASCII and optional DNP3 as native protocols and is remotely programmable through a choice of flexible programming languages. SCADAPack is based on a multiprocessor architecture with a co-processor used for handling on-board input/output channels. Modbus-TCP capable versions available as well.
Modbus, Modbus TCP
All Control Microsystems SCADAPack controllers are available with Ethernet communications, either as a standard specification or through an integrated 5906 Ethernet Gateway option. Ethernet ports are located within the controller lids and use standard RJ45 connectors. SCADAPack32 and SCADAPack32P controllers, which come standard with an Ethernet port, can be configured to use either Modbus TCP or Modbus RTU in UDP protocols. Any SCADAPack controller using the integrated 5906 Ethernet Gateway, includes Modbus UDP and Modbus RTU in TCP protocols.
Serial Protocols: Modbus RTU, Modbus ASCII, DNP3; Serial Protocol Modes Slave, Master, Master/Slave, Store and Forward; Ethernet Termination: RJ45, 10BaseT; Network Protocols: 1 IP:ARP, TCP, TFTP, UDP, ICMP; Ethernet Protocols: Modbus TCP, Modbus RTU in TCP, Modbus UDP, Modbus RTU in UDP; Wireless: Spread spectrum radio at 900MHz 3 or 2.4 GHz 3; I/O Terminations 2, 3, 5, 8 and 10 pole, removable terminal blocks, 12 to 22 AWG, 15A contacts