Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The ZG-2440M functions as a ZigBee network coordinator as well as a takeout point for the ZigBee network. The ZG-2400M supports multiple levels of routers to create sophisticated mesh networks that are self-forming and self-healing.
The ZG-2400M fits into existing Modbus networks by accepting Modbus commands, translating them into ZigBee format and sending them to the appropriate ZigBee end device or router. A typical installation will find the ZG-2400M connected to a Modbus PLC through its half-duplex RS-485 or full duplex RS-232 serial port. Instead of Modbus network wiring, the wireless ZigBee network connects the various sensors and actuators with the PLC.
Connectors: Serial Port DB9; Antenna Connection: Reverse SMA; Power: Two Pin Screw Terminal; RF Frequency: 2400 - 2483.5 MHz; Spreading Method: Direct Sequence; Modulation: O-QPSK; Transmit Power: +18 dBm into 50 ohms/100mW with provided dipole antenna; Receive Sensitivity: -94 dBm for 10-5 BER; RF Channels: 16; RF Data Rate: 250 Kbps; I/O: Full Duplex RS-232, Half Duplex RS-485; Operating Voltage: +9Vdc ? +50Vdc; Current Consumption: 120mA@9Vdc; Operating Temperature: -40?C to +70?C
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor