Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
DIN-rail mountable Modbus RTU relay unit for building and industrial automation
The Barix R6 is a Modbus/RTU relay for building and industrial automation; This Modbus/RTU relay supports the industry standard Modbus TCP protocol. Features 6 Relays (250 VAC/16 A, NO and NC)
RS-485 serial interface with Modbus/RTU-protocol support; DIN-rail mountable; Two extension connectors for easy daisy chaining of power supply, additional relay units (R6), I/O units (IO12) etc.
I/O Interfaces: 6 relays (240VAC 16A) on screw block with common, NO (normally open) and NC (normally closed) contacts for wires AWG26 - AWG14 / 0.15 - 2.5mm2 Power/RS-485 on detachable screw block for wires AWG28 - AWG16 / 0.08 - 1.3 mm2 2 module connectors (3?/75mm cable included); Serial Interfaces: 1 RS-485 (2-wire), 9?600/19?200 Baud , 8 bit, Even/No parity software configurable Protocol: Modbus/RTU; Power input: 9 - 30 VDC und 12 - 24 VAC consumption 3.5 Watt max. (all relays active)
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor