Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The MT101 is a wireless telemetry module with built-in GSM/GPRS modem and PLC function working with ModBus RTU protocol etc. over GSM/GPRS network. The modules can act as ModBus Master or ModBus Slave. Alarms and control can also be done by SMS messages. An OPC Server specially designed to communicate over GPRS networks is delivered with the module. The OPC server updates on scheduled queries and programmed events to reduce traffic costs. The OPC Server also has a built-in ODBC interface for writing and reading to/from databases. As a Master, the MT-101 reads a Slave devise and buffers the data in is own memory to enable alarm sending based on registers from a Slave.
Module with GSM/GPRS communication; 8 Optoisolated binary inputs/counters; 8 Optosiolated binary outputs/inputs/counters; 2 Optoisolated analog inputs 4-20 mA; 1 Serial port RS232/485/422; Installation on DIN-rail ;Firmware, program and configuration can be updated remotely over GPRS;
Network possibility; worldwide networking with GPRS roaming; OPC Server with ODBC function included.
See attached spec. sheet.
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor