Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
HMS Industrial Networks AB
Anybus Communicator - Modbus-RTU to Serial RS232/422/485 Gateway, AB7014 (with RS-232 on RTU slave side); AB7010 (with RS-485 on RTU slave side)
The Anybus Communicator Gateway is an external DIN-rail mounted gateway which provides Modbus-RTU slave connectivity on one side and a configurable serial RS232/RS422/RS485 on the lower side. The Communicator contains an embedded high-performance Modbus-RTU interface that performs an intelligent conversion between the serial protocol and the chosen industrial network. The translation between the serial protocol and the network is configured by using the software "ABC Config Tool".
RS232/422/485 selection possible with ABC Config Tool; Protocol modes: Master and Generic data modes; Built-in macro for Modbus RTU Master; Max 512 bytes of Input and 512 bytes of Output data; Baud rate on the serial interface selectable between 9600 bit/s and 57.000 bit/s; Single drop using RS232/422 or Multi-drop up to 31 nodes using RS485; Config Tool & Wizards for easy configuration & serial sub-network setup
DIN-rail mounting, with IP20 rating; PE via DIN-rail. EMC Certification; CE marked; UL, cUL certification; Tested and verified for Fieldbus/Ethernet conformance
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor