The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s. The CC-Link interface is a slave module for the CC-Link fieldbus system. It contains all the functionality needed to turn an application into a complete CC-Link remote device and it is configured to use the generic PLC profile. The CC-Link interface module is certified by the CLPA organisation and has proven conformance and interoperability with leading PLCs, HMIs.
Bridges I/O data between two different networks; Supports 150 different network combinations; Configuration via Windows Hyper Terminal; Supports Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23; Uses up to 4 occupied stations on CC-Link - configurable size; Uses the CC-Link PLC profile for data exchange; Modbus RTU transmission media RS485
Rugged aluminium housing; DIN-rail mounting, PE via DIN-rail; EMC Certification; CE marked, UL, cUL, Haz .Loc and ATEX certification; Tested and verified for Fieldbus/Ethernet conformance