The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLCs, HMIs. Profibus address is set via rotary switches 0-99. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.
Bridges I/O data between two different networks; Supports 150 different network combinations; Configuration via Windows Hyper Terminal; Watchdog support; Sync and Freeze; Supports PA baud rate 45.45 kbps; Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23; Modbus RTU transmission media RS485; Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158
Rugged aluminium housing; DIN-rail mounting, PE via DIN-rail; EMC Certification; CE marked; UL, cUL, Haz. Loc and Atex certification; Tested and verified for Fieldbus/Ethernet conformance