The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology. The Profinet IO baudrate is 100Mbps (full duplex). The IP-address and additional IP-settings is configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection. IT-functions like Web-server, e-mail client, FTP-server are supported. IT functions can be used simultaneously with the Profinet IO communication. Modbus/TCP is also supported with "Read Data" functions. The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.
Bridges I/O data between two different networks; Supports 150 different network combinations; Configuration via Windows Hyper Terminal; Modbus RTU transmission media RS485; Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23; Gateway diagnostics via Web pages; Profinet 100 Mbps twisted pair RJ45 connection; Profinet IO and IT functions; 1 Mb storage space on Flash disc; TCP/IP settings configurable with Profinet config tool, Anybus IPconfig or DHCP
Rugged aluminium housing; DIN-rail mounting, PE via DIN-rail; EMC Certification; CE marked; UL, cUL, Haz .Loc and Atex certification; Tested and verified for Fieldbus/Ethernet conformance