The Anybus-X gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very simple and is carried out using the RS232 configuration port and a standard terminal interface on a PC, such as Hyper Terminal for Windows. The gateway consists of two independent ModBus-RTU Slave interfaces, logically and galvanically separated. The Modbus RTU Slave interface is implemented according to Modbus Protocol implementation guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baud rate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.
Bridges I/O data between two different networks; Supports 150 different network combinations; Configuration via Windows Hyper Terminal; Logically separated Modbus RTU interfaces; Galvanically isolated Modbus RTU interfaces; Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23; Modbus RTU transmission media RS485
Rugged aluminium housing; DIN-rail mounting, PE via DIN-rail; EMC Certification; CE marked; UL, cUL, Haz. Loc and ATEX certification; Tested and verified for Fieldbus/Ethernet conformance