Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
DeltaV Virtual IO Module (VIM) Network Gateway provides a native DeltaV IO Interface to open plant Ethernet networks and devices that use the Modbus TCP/IP or Ethernet/IP protocol. DeltaV Controllers can read and write signals from plant floor devices that use these Ethernet networks such as PLC's Motor Control Centers and Weigh Scales.
Seamless Integration with DeltaV; Intuitive Network Setup: Graphical, drag and drop functionality; Each Virtual I/O Module can emulate up to 4 DeltaV serial cards and support up to 128 Serial Card Datasets of information from 32 network addresses; User configurable IP addressing allows the Virtual I/O Module to be used in almost any plant environment regardless of network scheme; Mounts in the same manner as the DeltaV controller, using a DeltaV 2-wide or 4-wide carrier and power Supply connect to the DeltaV I/O Bus by the carrier side connector.
See attached spec. sheet.
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor