Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
Ethernet solution for Balluff RFID system families with Ethernet TCP/IP and the realtime variants EtherNet/IP, Modbus TCP. Balluff BIS C/L/M and S identification systems are compatible with all the common network technologies currently favored by the large automobile manufacturers.
This interface allows Balluff identification systems to be connected to practically any office or industrial PC. Users can use a so-called Com Port Redirector (driver software) through an RS232 interface or work directly in Ethernet. The open standard for industrial network uses star topologies and suitable (managed) switches. These prevent collisions and make the network usable for realtime control applications. With ?Common Industrial Protocol? (CIP?) it serves to send cyclical I/O data as well as acyclical parameter data. The same devices can also be used with the Modbus TCP interface.
See attached spec. sheet.
Copyright © 2005-2018 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor