Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The netIC is a complete "Single Chip Module" in the compact dimensions of a Dual-In-Line (DIL) 32 pin plug-in module. It is based on the network controller netX and contains all components of a fieldbus or real-time Ethernet interface with an integrated 2-port switch and hub. With the netX technology the whole spectrum of relevant fieldbus and real-time Ethernet systems is covered. By exchanging the firmware, one single netIC can be used for multiple communication systems. User data is transferred with simple read-write commands to the application via the above mentioned serial interfaces. The well-known Modbus RTU protocol is used as a serial protocol. Conventional shifting registers can be controlled via a synchronous serial interface requiring no additional processor for a simple I/O-device.
Modbus TCP, Modbus RTU
Compact DIL-32 communication module for cost-efficient field devices; Modbus RTU protocol via SPI or UART to the host; One hardware for all Real-Time Ethernet systems; Direct I/O data transfer via external shift registers; One design for all networks due to standard interfaces; Firmware update and IP configuration via integrated WebServer
See specification sheet.
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor