This stand-alone DIN-rail mounted protocol gateway provides a single Ethernet port. The Modbus TCP (MNET) driver can be used to interface many different protocols into the Schneider Electric Quantum family of processors as well other software solutions supporting the protocol. Supports both Client and Server connections.The ProLinx BACnet (Building Automation and Control networking) protocol version is designed specifically to meet the communication needs of building automation and control systems for applications such as heating, ventilating, and air-conditioning control, lighting control, access control, and fire detection systems with limited BACnet command support.
Shared database exchanges information from devices on both networks; View diagnostics between both networks; Modbus TCP adds Ethernet capability to one of the most widely used industrial protocols; Suitable for SCADA and "foreign device" interface applications; Floating point data movement supported, including configurable support for Enron and Daniel floating point applications; Communicates with programmable controllers, intelligent devices, sensors and instruments; Allows PCs and HMIs to monitor field devices
Power Supply: 24 VDC nominal, 18 to 32 VDC allowed, Positive, Negative, GND Terminals; Current Load: 500 mA max @ 32 VDC max; Operating Temp -4° F to 122° F (-20° C to 50° C); Storage Temp -40° F to 185° F (-40° C to 85° C); LED Indicators; Configuration Serial Port DB-9M RS-232 only; No hardware handshaking; Ethernet Port (Ethernet modules only) 10Base-T half duplex, RJ45 ConnectorLink and Activity LED indicators; Electrical Isolation: 1500 V RMS at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991; Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration; Application Ports: Modbus Plus Connector, Two DB9 Female Standard Modbus Plus connectors; Serial Port Isolation: 2500 V RMS port signal isolation per UL 1577 3000 VDC min. port to ground and port to logic power isolation