Note: You are seeing this text-only version of our site
because you are using an older browser that is not standards-compliant.
How to upgrade to a FREE standards-compliant browser.
Some Netscape 7 and Mozilla users may see this warning in error.
to fix the problem.
Back to Company
The GSC400 is designed to provide complete control, protection, AC metering, and engine instrumentation for both standard and electronic engines and gensets. The module is configured using both the front panel buttons or our PC configurator software. The GSC400 provides direct mounting compatibility with other DynaGen controllers such as the GSC300 to allow for a full range of options to fit the application. A Modbus/RTU Port is provided for connection to remote annunciators, SCADA systems, as well as options for remote monitoring over Internet and cellular.
SAE J1939 Protocol; NFPA Level 1 Compliant; 3 On-Board 40A Relays; Real-Time Clock; 100 Event Failure Log; Conformally Coated for protection against moisture and contaminants; 8 Configurable Switched Inputs & 9 Configurable Switched Outputs; Autostart on Low Battery Function; Built-in Engine Exerciser; Modbus RTU Port for connection to remote annunciators and other devices; Options available for remote monitoring over Internet and cellular; Free PC Configurator Software; Front or Rear Mountable; Accepts industry standard senders (VDO, Datcon, Murphy, and more); Custom senders configurable with PC software; Dummy Load function to prevent wet stacking; Options for Fuel OFF during Crank Rest; Restart on False Attempt and Locked Rotor protection; Password protected; 5-Year Warranty.
7 to 32V operation; 50ma standby current draw; -40C to +85C operation; 4.3" H x 5.5" W x 2.75" D; True RMS voltage and current sensing +/- 1% accuracy; 6 analog inputs; 8 digital inputs; 9 digital
Copyright © 2005-2017 Modbus Organization, Inc.
PO Box 628 Hopkinton, MA 01748. All rights reserved.
By using Modbus.org, you accept the terms of our visitor