The DAQ Series Five Input Module comes equipped with five opticallyisolated, digital inputs. Each input can be used to monitor the state of a digital signal. The inputs can be used to trigger email alerts based on a single change of state or after a number of state changes. The inputs can also be used as counters, or to control the relay contacts of other ControlByWeb? products that are located in remote locations.
No programming required; Built-in web server; Configurable input status web page; Email alarms; Built-in counters; Optically isolated inputs; Loss of Power flag; 14-pin removable terminal connector; DIN rail or wall-mount
Power requirements: 9-28VDC; I/O: 5 optically-isolated inputs; Input Voltage: 11-30VDC; Input Current: 4.9mA to 13.4mA; Minimum hold time on inputs: 62.5mS;
Input Functions: Monitor State, Counter, Remote Relay Control; Input to Remote Relay Settings: equal, invert, toggle, latch, pulse, none; Input Isolation: 1500V;
Counters: 5, Max Count: 65535, Maximum Count Rate: 8Hz; Network: 10/100 Base-T Ethernet Network Setup: Static IP address assignment, TCP port selectable Connectors: 14-Position, removable terminal strip; Operating Temperature: -20°C to 70°C (-4°F to 158°F); Size: 1.41 in (35.7 mm) wide X 3.88 in (98.5mm) tall X 3.1 in (78.0mm) deep; Weight: 5oz (142 grams); Enclosure Material: Lexan 940 (UL94 V0 flame rated); Electromagnetic Compliance: IEC CISPR 22, CISPR 24, FCC 47CFR15 (Class B), EU EN55024, EN55022; Product Safety: IEC 60950-1/EN60950-1